Objective
The purpose of this test is to demonstrate the induction soldering cable to metallic plate process.
Recommended Equipment
The recommended equipment for this test is the DW-UHF-6kw-I handheld induction heater.
Results and Conclusions:
The results were satisfactory at 14 seconds. The complete process can be achieved in less than 5 seconds by increasing the frequency from under 200 kHz to over 300 kHz, as well as by increasing the induction heating power
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/Soldering-Cable-to-Metallic-Plate-1024x662.png)
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/Induction-Soldering-Cable-to-Metallic-Plate2-1024x623.png)