2021年12月17日星期五

Induction Soldering Brass Assembly

Induction Soldering Brass Assembly With High Frequency Soldering Units Objective: To heat a brass bellows and end cap assembly to 4500F for soldering within 20 seconds. Presently, a soldering iron is used to produce the joint between the bellows and cap. The customer requests a quality solder joint with minimal heating of the bellows to prevent annealing and performance losses. Solder preforms, in the form of flat washers, are to be used to complete this application. Material: Brass Bellows measuring 2" in diameter Solder Preforms Cadmium Free Flux Temperature: 4500F Application: The DW-UHF-20kW output solid state induction power supply along with a unique three (3) turn double wound helical coil was utilized to achieve the following results: 4500F was reached and solder flow completed in 6.3 seconds. A quality repeatable solder joint was observed. Equipment: DW-UHF-20kW output solid state induction power supply including one (1) remote heat station containing one (1) 1.2 μF capacitor, and a unique three (3) turn double wound helical coil with an inside diameter of 0.4". Frequency: 307 kHz Induction Soldering Brass

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.