2021年12月30日星期四

brazing heating exchanger

Objective Induction brazing copper pipe of heating exchanger assembly using stationary C coil or U shape induction heating system. Target speed for assembling all 6 joints was 30 seconds, or approximately 5 seconds per joint. The requirement was to braze all of the joints inside the housing without affecting the plastic covers.
Equipment DWS-20 handheld induction brazing machine handheld induction brazing heater Materials • Copper tubing • Brazing flux Key Parameters Temperature: Approximately 1292°F (700°C) Power: 15 kW Time: 5 sec per joint
Process: U shape custom coil is suitable for induction brazing of custom samples. Results/Benefits: Prior to induction brazing copper pipe, the customer was using flame brazing and had to braze the joints outside of the enclosure. With the induction brazing, they were able to achieve the following benefits:
  • Braze inside the enclosure
  • Improve productivity of the brazing operation
  • Precise control of the time and temperature
  • Safe heating with no open flames
  • Higher energy efficiency

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.