Ultrahigh Frequency Brazing System

Ultrahigh Frequency Brazing System With Induction  

Model		DW-UHF-100KW
Input Voltage		3 phases,380V±10%,50/60Hz
Output Power		100KW
Oscillate frequency		50-150KHz
Max Input Current		145A
Cooling Water		>0.2 MPa, 10L/Min,
Weight		160KG
Duty Cycle		100%
Size	Main	760x400x880mm
	Head	510x300x450mm

Main characteristics: 1.With high frequency up to 150KHZ , and very thin and tiny parts can be easily heated. 2.IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost. 3.100% duty cycle, continuous working is allowed at maximum power output. 4.Constant current or constant power status can be selected accordingly to achieve higher heating efficiency; 5.Display of heating power and heating current and oscillating frequency. 6.Simple to install , installation can be done by unprofessional person very easily; 7.Light weight, small size; 8.different shape and size of induction coil can be changed easily to heat different parts. 9.Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability. 10.Auto heating time: 0.1-99.9seconds,Auto retaining time: 0.1-99.9seconds,Auto cooling time: 0.1-99.9seconds Main applications: Quenching of shaft Quenching of gear Brazing of copper bars Heating of bullet shell Floating melt with water cooled crucible Annealing of wire continuously,Etc.   [wpforms id="3947"]