- With high frequency up to 11KHz^2.0MHz the quenching thickness can be controlled lower than 1mm, and very thin and tiny parts can be easily heated.
- IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.
- 100% duty cycle, continuous working is allowed at maximum power output.
- Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
- Display of heating power and heating current and oscillating frequency.
- Simple to install , installation can be done by unprofessional person very easily;
- Light weight, small size;
- different shape and size of induction coil can be changed easily to heat different parts.
- Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
Model |
DW-UHF-6KW-I |
|
Input Voltage |
Single phase,220V ,50-60HZ |
|
Output Power |
4.5KW |
|
Oscillate frequency |
1100-2000KHZ |
|
Input Current |
5-20A |
|
Weight |
21KG |
|
Size |
Main |
330X310X155mm |
Heater |
125X60X95mm |
- heat treatment of gear and shaft.
- heating of wire smaller than 1mm
- floating melt for institute or college research and so on.
- surface quenching.