2022年9月9日星期五

Induction Shrink Fitting Steel Tube

Induction Shrink Fitting Steel Tube With IGBT Heating Units Objective Heating a steel tube to 500-1000°F for a shrink-fitting application. Determine expansion (growth) of ID at varying temperatures. Material Steel tubes 7” OD x 4.75” ID x 5” heat zone Type ‘K’ thermocouple to measure temperature Thermal blanket Temperature 500, 800, 1000 °F (260, 427, 538° C) Frequency 66 kHz Equipment DW-HF-7.5, 7.5 kW, 150-400 kHz induction power supply, equipped with a remote heat station containing two 1.5 μF capacitors (for a total of 0.75 μF) A multi-turn, special series-parallel induction heating coil designed and developed specifically for this application. Process Initial tests were completed on a sample without a thermal blanket. A thermocouple is slipped between the copper ring and the steel tube to measure temperature. The part measured 4.940” (at room temperature with an ID gauge.) The part reaches 1000°F (538°C) in about 10 minutes. The chart below shows the comparison between theoretical and experimental measured results 1 Results/Benefits The part measures 4.975” at 1000°F yielding an expansion of 0.035” (4.975 minus 4.94). At 500 and 800°F the expansion numbers were 4.950 and 4.964 respectively. When using a thermal blanket the heat time is reduced by about 90 seconds (8.5 minutes as opposed to 10 minutes).   Heating shrink tube             induction shrink fitting tube               Shrink Fitting Steel Tube      

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.