2023年9月4日星期一

Brazing Brass to Aluminum with Induction

Brazing Brass to Aluminum with Induction Objective: Copper 'tees' and 'ells' are to be brazed to the aluminum body of a refrigeration valve Material customer's valve copper fittings braze Temperature 2550 ºF (1400°C) Frequency 360 kHz Equipment DW-UHF-10KW induction heating system including a workhead containing two 1.5μF capacitors (total 0.75μF) and a three-turn helical coil Process The valve is placed inside the coil and RF power is applied until the part is heated to the required temperature and the braze is seen to flow into the joint. Two tube sizes were run using the same induction system settings with differing cycle times. Results/Benefits • energy is applied only to the zone to be heated • heating of the joint/braze is uniform and repeatable

evaporate water boiler with induction heating

evaporate water boiler with induction heating|induction steam boilers| electromagnetic induction steam generators|induction heating steam boilers

This invention relates to an induction evaporate water boiler | induction steram boiler|electromagnetic induction steam generator which operates with a low-frequency alternating current electric power source. More specifically, this invention relates to an electromagnetic induction steam boiler which is compact and highly efficient being capable of continuous operation, intermittent operation and empty-heating operation.

Steamers in current use, such as cooking steamers, convection ovens, cooking steam warmers, steamers for defrosting frozen food, steamers for processing tea leaves, steam baths for household use, steamers for cleaning, and steamers used in restaurants and hotels, are widely used as equipment for utilizing the steam they generate.Generally, fossil fuels (gas, petroleum, crude petroleum, coal and so forth) are burned as heat sources for large steamers in current use. This heating method, however, is not economical for compact steamers.

Relatively compact steamers in current use commonly employ electrical resistance heaters as a heat source. Such steamers obtain steam intermittently by spraying water on an iron plate which has been heated in advance with a heater or the heater's protecting tube from inside or beneath the plate.

Energy saving rate of induction evaporate water boiler| electromagnetic induction steam boiler:

Because the iron container heats itself, the heat conversion rate is particularly high, which can reach more than 95%; the working principle of electromagnetic steam generator is that when some water enters the container, it will be heated into steam Drain, to ensure a fixed way of replenishing water, there will be continuous steam utilization.

Product Description of induction evaporate water boiler:

Industrial quality high pressure induction steamist boiler pure steam generator from china manufacturers 1) LCD Full-Automatically Intelligent Electronic Control System 2) High-quality Core Component——Electromagnetic induction heater 3) High-quality Components and Parts——Famous Brand Delixi Electrical Appliance 4) Multiple Safety Interlock Protection 5) Scientific Design and Attractive Appearance 6) Easy and Rapid Installation 7) Magnetic induction coil heat up boiling water Generate steam - Is Much More Eco-Friendly and Economical 8) Wide Application Range

Item content / model Rated power (KW) Rated steam temperature (℃) Rated current (A)   Rated steam pressure (mpa)   Evaporation (kg/h) Thermal efficiency (%)   Input voltage (V/HZ) Cross section of input power cord (MM2)   Steam outlet diameter   Relief valve diameter Inlet diameter Drainage diameter Overall dimensions (mm)  
HLQ-10 10 165 15 0.7 14 97 380/50HZ 2.5 DN20 DN20 DN15 DN15 450*750*1000
HLQ-20 20 165 30 0.7 28 97 380/50HZ 6 DN20 DN20 DN15 DN15 450*750*1000
HLQ-30 30 165 45 0.7 40 97 380/50HZ 10 DN20 DN20 DN15 DN15 650*950*1200
HLQ-40 40 165 60 0.7 55 97 380/50HZ 16 DN20 DN20 DN15 DN15 780*950*1470
HLQ-50 50 165 75 0.7 70 97 380/50HZ 25 DN20 DN20 DN15 DN15 780*950*1470
HLQ-60 60 165 90 0.7 85 97 380/50HZ 25 DN20 DN20 DN15 DN15 780*950*1470
HLQ-80 80 165 120 0.7 110 97 380/50HZ 35 DN25 DN20 DN15 DN15 680*1020*1780
HLQ-100 100 165 150 0.7 140 97 380/50HZ 50 DN25 DN20 DN25 DN15 1150*1000*1730
HLQ-120 120 165 180 0.7 165 97 380/50HZ 70 DN25 DN20 DN25 DN15 1150*1000*1730
HLQ-160 160 165 240 0.7 220 97 380/50HZ 95 DN25 DN20 DN25 DN15 1150*1000*1880
HLQ-240 240 165 360 0.7 330 97 380/50HZ 185 DN40 DN20 DN40 DN15 1470*940*2130
HLQ-320 320 165 480 0.7 450 97 380/50HZ 300 DN50 DN20 DN50 DN15 1470*940*2130
HLQ-360 360 165 540 0.7 500 97 380/50HZ 400 DN50 DN20 DN50 DN15 2500*940*2130
HLQ-480 480 165 720 0.7 670 97 380/50HZ 600 DN50 DN20 DN50 DN15 3150*950*2130
HLQ-640 640 165 960 0.7 900 97 380/50HZ 800 DN50 DN20 DN50 DN15 2500*950*2130
HLQ-720 720 165 1080 0.7 1000 97 380/50HZ 900 DN50 DN20 DN50 DN15 3150*950*2130

  Advantages & Features of Electromagnetic Induction Heating System: -Save electricity 30%~80%, especially for big power machine. - No influence on working environment: high frequency heating system has heat energy utilization rate of 90%+. - Heating fast, accurate temperature control - Can work for a long time in harsh environments - High frequency heating system make heating power bigger compare to traditional resistance wire heating. - No unsafe factors compare to traditional heating: temperature on surface of material container about 50°C~80°C.

Features of Induction Steam Generator: 1) LCD Full-Automatically Intelligent Electronic Control System 2) High-quality Core Component——Electromagnetic induction heater 3) High-quality Components and Parts——Famous Brand Electrical Appliance 4) Multiple Safety Interlock Protection 5) Scientific Design and Attractive Appearance 6) Easy and Rapid Installation 7) Magnetic induction coil heat up boiling water Generate steam - Is Much More Eco-Friendly and Economical 8) Wide Application Range

Applications of induction evaporate water boiler|Electromagnetic Induction Heating Steam Generators 1, widely applied in food industry: like steam box, Dofu machine, sealing machine, sterilization tank, packing machine , coating machine and so on. 2, applications cases in biochemical industry: fermenter, reactor, sandwich pot, blender, Emulsifier and etc. 3, gradually be applied in washing industry like ironing table, washing machine dryer, drying and cleaning machine, washing machine and glue machine etc.  
Comparison of Different Types of Steam Generators
Steam Generator Type Gas Steam Generator Resistance Wire Steam Generator Coal Steam Generator Electromagnetic Heating Steam Generator
Energy Used Gas by Fire Resistance Wire by Electricity Coal by Fire Electromagnetic Heating by Electricity
Heat Exchange Rate 85% 88% 75% 96%
Need Someone on Duty Yes No Yes No
Temperature Control Accuracy ±8℃ ±6℃ ±15℃ ±3℃
Heating Speed Slow Quick Slow Very quick
Working Environment A little pollution after fired Clean pollution Clean
Production Risk Index Risk of gas leakage, complicated pipelines Risk of electricity leakage pipe inner wall easy be scaling Risk of high temperature, heavy pollution No risk of leakage, water & electricity separated completely
Operational Performance Complicated Simple Complicated Simple

Application of induction heating steam generators|induction heating steam boilers:

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.
Equipment Handheld induction brazing heater1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)
Process:
  1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
  2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
  3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
  4. After 60 seconds in the coil, the brazing was complete.
  5. The material was cooled in water following the completion of brazing.
  6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.
Results/Benefits: Induction brazing heating provides:
  • Strong durable joints
  • Selective and precise heat zone, resulting in less part distortion and joint stress than welding
  • Less oxidation
  • Faster heating cycles
  • More consistent results and suitability for large volume production, without the need for batch processing
  • Safer than flame brazing
https://dw-inductionheater.com/brazing-copper-tube-to-brass-fitting.html?feed_id=226186&_unique_id=64f5aa994fcf8

2023年9月3日星期日

induction brazing carbide tip onto steel head teeth

high frequency induction brazing carbide tip onto steel head teeth process

Objective In this application test, induction brazing carbide tip onto steel working head teeth.
Induction Brazing Equipment DW-UHF-10kw induction brazing machine Customized induction heating coil Materials • Steel working head teeth • Brazing paste Key Parameters Power: 4.5 kW Time: 6 seconds
Induction Brazing Process:
  1. Brazing paste is put on the tool
  2. The steel working head teeth are attached.
  3. The assembly is positioned in the three-turn coil.
  4. The assembly is heated.
  5. The joint is completed in 6 seconds.
Results/Benefits:
  • Strong durable joints
  • Selective and precise heat zone, resulting in less part distortion and joint stress than welding
  • Less oxidation
  • Faster heating cycles
  • More consistent results and suitability for large volume production
  • Safer than flame brazing
Induction Brazing Carbide Tipping is a specific brazing process by which a hardened tip material is applied to a base material to produce an extremely hard cutting edge. When using induction heating, the tipping material is brazed to the base material with temperatures up to 1900F.

Brazing stainless steel with induction

High frequency induction brazing stainless steel tube to stainless steel fitting with DW-HF-25kw-A induction heater.

Objective Brazing stainless steel tubing and stainless steel fittings Equipment DW-HF-25kw-A induction brazing machine
Materials 1.75″(44.45mm) Hexagon fitting Power: 10.52 kW Temperature: 1300°F (704°C) Time: 30 seconds
Results and Conclusions:
  • Induction heating pinpoints the heat to the desired area of the part
  • Improved process control for precise heating to a desired temperature
  • Power on demand and rapid, consistent heat cycles
  • Technology without pollution, which is both clean and safe
https://dw-inductionheater.com/brazing-stainless-steel-with-induction.html?feed_id=226111&_unique_id=64f4f38bd5d68

Induction Heating Sintering Copper Powder

Induction Heating Sintering Copper Powder With High Frequency Induction Sintering Heater Objective Sintering copper powder to a stainless steel shaft Material Steel shaft & shell assembly, approx 2” (50.8mm) diameter, 2” (50.8mm) tall, copper powder Temperature 1600 ºF (871 ºC) Frequency 54 kHz Equipment • DW-HF-45kW induction heating system, equipped with a remote workhead containing eight 1.0 μF capacitors for a total of 8.0 μF. • An induction heating coil designed and developed specifically for this application. Process A four-turn helical coil is used to heat the assembly for five minutes. This provides slow, even heat for good penetration through the shell into the powder. Results/Benefits Induction heating provides: • Even heat through the shell to sinter the powder. • A method that is easily integrated into an automated production line. The design may be adapted to accommodate the indexed heating of several assemblies at the same time. • Hand- free operation that involves no operator skill for manufacturing.

Induction Shrink Fitting Assemblies

Induction Shrink Fitting Assemblies Objective To use induction to prepare cast iron assemblies for shrink fit assembly Material Customer supplied cast iron rocker arms of varying sizes Temperature 450 ºF (232 °C) Process Time 20 seconds Frequency 148 kHz Equipment DW-UHF-5.0 kW, 150-400 kHz solid state induction heating system, equipped with a remote heat station containing one 1.0μF capacitor An induction heating coil designed and developed specifically for this application. Process A four-turn helical coil heats the ring at one end of the assembly. The coil is designed to concentrate the field towards the center of the assembly where the thermal mass is greatest. Across the heated ring, the coil presents a lighter field. After heating, a pin is place within the ring and the assembly is water quenched. The heat time varies from part to part but is less than 20 seconds. Results/Benefits Induction heating satisfies the needs of this process for: • rapid part heating • flexibility for parts of differing geometries • individual, series part heating, suitable for automation • a clean source of heat • even heat distribution Induction Shrink Fitting Assemblies

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.