Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

https://dw-inductionheater.com/brazing-copper-tube-to-brass-fitting.html?feed_id=243162&_unique_id=662c50aa0c3fa

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

https://dw-inductionheater.com/brazing-copper-tube-to-brass-fitting.html?feed_id=226186&_unique_id=64f5aa994fcf8

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing

Brazing copper tube to brass fitting

High frequency Induction brazing copper tube to brass fitting process

Objective Induction brazing copper to brass fitting using brazing alloy and flux within 60 seconds.

Equipment 1.DW-UHF-6KW-III handheld induction heater 2 turn helical coil Materials • Brass fitting • Copper tubing • Silver brazing alloy (pre-formed) • Flux Key Parameters Temperature: Approximately 1350 °F (732°C)

Process:

1. For Induction Brazing Copper to Brass, first the copper tubing and brass fitting were assembled together.
2. A pre-form of the silver brazing alloy was seated above the joint, and flux was added.
3. The assembly was placed the two-turn helical coil, and positioned so the targeted joint was centered in the coil.
4. After 60 seconds in the coil, the brazing was complete.
5. The material was cooled in water following the completion of brazing.
6. The joint was then cross-sectioned to validate that the induction brazing process had produced a strong, high quality joint.

Results/Benefits: Induction brazing heating provides:

• Strong durable joints
• Selective and precise heat zone, resulting in less part distortion and joint stress than welding
• Less oxidation
• Faster heating cycles
• More consistent results and suitability for large volume production, without the need for batch processing
• Safer than flame brazing