Induction Heating Steel Part For Hot Heading With IGBT Induction Heater
Objective Heating steel parts to 1900ºF (1038ºC) for hot heading application
Material Steel parts with 7/16” (11.11mm) OD and ceramic piece
Temperature 1900 ºF (1038ºC)
Frequency 440 kHz
Equipment • DW-UHF-6kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor.
• An induction heating coil, designed and developed specifically for this application.
Process A four turn helical coil with ceramic insert is used to heat a 0.75” (19mm) section of the part to 1900ºF (1038ºC) for 7.5 seconds. A ceramic piece is so the part does not come in
contact with the coil.
Results/Benefits Induction heating provides:
• Hands-free heating that involves no operator skill for manufacturing
• Direct application of the heat on the work piece with precision and consistency
• Even distribution of heating
• Low pressure and minimal residual part stress
https://dw-inductionheater.com/induction-heating-steel-part-for-hot-heading.html?feed_id=247340&_unique_id=66539763e7c5f
