2024年5月4日星期六
High Frequency Induction Cap Sealing
High Frequency Induction Cap Sealing With IGBT heating units
Objective To heat an aluminum foil inside a plastic shampoo cap for sealing
Material 2.0” diameter, plastic flip top cap, with a 0.9” diameter aluminum foil seal
Temperature 250 - 300 ºF (120 – 150 °C)
Frequency 225 kHz
Equipment DW-UHF-7.5 kW, induction heating system, equipped with a remote heat station containing two 1.5 μF capacitors (total capacitance 0.75 μF).
An induction heating coil designed and developed specifically for this application.
Process A three-turn two-position helical coil is used to heat the aluminum foil in a tunnel style assembly. Product (containers)
passes easily under the induction coil. The assembly is located such that the entire perimeter of the aluminum foil is heated
uniformly. The container and cap is placed under the coil and RF power delivered for 0.12 seconds. The aluminum foil heats
and seals to the plastic of the cap.
Results/Benefits This induction heating configuration fulfills the process
requirements and:
• uses a simple, economical coil design
• increases throughput with a dual-position coil
• delivers quality, consistent seals
• offers a repeatable process, well-suited for automation
https://dw-inductionheater.com/high-frequency-induction-cap-sealing.html?feed_id=244372&_unique_id=663706d36d7c3
关注者
博客归档
-
▼
2024
(785)
-
▼
五月
(66)
- Induction Heating Steel Mold
- induction heating graphite susceptor
- Induction Heating Magnetic Iron Oxide
- High Frequency Heating Steel Pipe
- Induction Hot Plate
- Induction Heating Steel Pin
- Induction Heating Aluminum Pipe
- Induction Heating Stainless Steel
- Induction Preheating Hot Heading
- Induction Heating Wires For Hot Heading
- Induction billet heating system overview
- Induction Heating Steel Part For Hot Heading
- Induction billet heating system overview
- Induction Heat Setting
- Soldering Steel To Brass With Induction Heater
- Soldering Antenna Wire With Induction
- Industrial Copper Melting Furnaces : Types, Applic...
- Induction Soldering Electrical Circuits
- Industrial Copper Melting Furnaces : Types, Applic...
- induction soldering fiber optic cable
- Soldering Fiber Optic for Hermetic Sealing
- Soldering Solar Panels With Induction
- Induction Crucible Melting Furnace for Smelting Al...
- Induction Soldering Brass Rings
- Induction Crucible Melting Furnace for Smelting Al...
- Induction Soldering Brass Assembly
- Induction Soldering Copper Tube
- Electric Bogie Hearth Furnaces-Heat Treatment Furn...
- Induction Soldering Brass Tube-Pipe
- Induction Soldering Steel Parts
- Induction Soldering Stainless Steel Tubing
- Induction Soldering Copper Tap
- Induction Soldering Wire of Co-axial
- Induction Soldering Wires Onto Connection
- Induction Soldering Brass Heating Exchanger
- Induction Soldering Circuit Board
- Induction Soldering Brass To Copper
- Induction Soldering Stainless Steel To Wire
- Induction Soldering Aluminum Housing
- Induction Soldering Copper Wires
- RF Soldering Circuit Board
- Induction Soldering Steel Cover
- Induction Soldering Brass Connector
- Induction Soldering Fuse Caps
- Induction Heating Aluminum Catheter Tipping
- Induction Heating Molding Catheter Tip
- Induction Heating Plastic Catheter Tube
- Induction Heating Plastic Catheter Tube
- Induction Shrink Fitting Steel Tube
- Induction Shrink Fitting For Inserts
- Heating Shrink Fitting Camshaft Gear
- Induction Shrink Fitting Assemblies
- Shrink Fitting Assemble Connecting Rods
- Inductioin Shrink Fitting Aluminum Pulley
- Induction Shrink Fit Aluminum Shaft
- Induction Shrink Fitting Carbide Ring
- Shrink Fit Steel Gear onto Shaft
- Heating Aluminum Foil For Cap Sealing
- High Frequency Induction Cap Sealing
- Induction Brazing Carbide To Stainless Steel
- Induction Preheating Hot Rod Heading
- What is induction tempering?
- What is induction bonding?
- What is induction welding?
- What is induction annealing?
- Why choose Induction Brazing?
-
▼
五月
(66)
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.