2022年2月1日星期二

Induction Soldering Cable to Metallic Plate

Objective The purpose of this test is to demonstrate the induction soldering cable to metallic plate process. Recommended Equipment The recommended equipment for this test is the DW-UHF-6kw-I handheld induction heater.
Key Parameters Power: Up to 0.72 kW Temperature: 482°F (250°C) Time: 4.5 seconds to 14 seconds
Results and Conclusions: The results were satisfactory at 14 seconds. The complete process can be achieved in less than 5 seconds by increasing the frequency from under 200 kHz to over 300 kHz, as well as by increasing the induction heating power

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.