The Professional Induction Brazing Stainless Steel Tubing Joints Technology
The goal of this induction brazing application test is for Induction Brazing Stainless Steel Tubing Joints evenly for increased repeatability.![](https://dw-inductionheater.com/wp-content/uploads/2020/04/brazing-stainless-steel-tubing-joints.png)
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/induction-brazing-stainless-steel-joints.png)
Process:
The two stainless tubes where joined together and an alloy ring was placed around the joint. Black flux was then applied to the joint for a better induction brazing process. The work piece was placed inside the helical coil for 15 seconds where 8 kW of induction heating power was applied. The work piece reached 1472°F (800°C) and was successfully brazed. The HLQ induction heating equipment recommend for this application is the DW-UHF-10KW induction brazing heater along with a 10 kW power supply.
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/induction-brazing-stainless-steel-tubing-joints.png)
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/induction-brazing-stainless-steel-tubing-joints.png)
![](https://dw-inductionheater.com/wp-content/uploads/2020/04/Brazing-Stainless-Steel-Tubing-1024x576.png)