2023年9月3日星期日

Pipeline Coating Process

HLQ MYD series Pipeline Coating Systems Renowned across the gas and pipeline processing industries, HLQ MYD series Pipeline and Tube Coating Systems are globally acknowledged for their ability to provide the highest levels of quality and performance in pipe coating, heat treatment and preparation applications. HLQ MYD series offshore systems revolve around field joint processing, with a series of induction systems utilized for heating and coating of field joints on pipe laying vessels. Post weld heat treatment machine HLQ MYD series Pipeline Coating Renowned across the gas and pipe processing industries, HLQ MYD series Pipe and Tube Coating Systems are globally acknowledged for their ability to provide the highest levels of quality and performance in pipe coating, heat treatment and preparation applications. HLQ MYD series offshore systems revolve around field joint processing, with a series of induction systems utilized for heating and coating of field joints on pipe laying vessels. Modern technology has placed increased emphasis on coatings’ corrosion protection, electrical characteristics, thermal properties, appearance, and other special properties. Such coatings have included simple lacquers and paints, plastics, ceramics, metals, and various chemical conversion coatings. Induction heating has found increased application for coatings which must be ‘cured’ or ‘dried’ rapidly. Induction is suitable for either drying pipe after alkaline cleaning and rinsing, or for curing coating applied to the surface. Pipeline heating spray paint coatingInduction heating is particularly applicable to high-speed continuous coating lines. Since heating occurs directly in the pipe as it passes through an induction coil, it is heated almost instantaneously to a controlled temperature. This allows a short heating zone for processing, saving space and preventing problems associated with a shutdown in the processing line, such as excess heating of the wire coating from residual heat. Integration of an induction heating operation with a production line is simple because of instantaneous heat control and ease of transporting the wire though the short induction coil. [pdf-embedder url="https://dw-inductionheater.com/wp-content/uploads/2018/10/Catalogue-MYD-series-heating-machine.pdf" title="Catalogue-MYD series heating machine"] https://dw-inductionheater.com/pipeline-coating-system.html?feed_id=226036&_unique_id=64f43cc32d31d

2023年9月2日星期六

refrigeration induction brazing refrigerator copper pipes

Refrigeration Induction Brazing Refrigerator Copper Pipes Process

Objective The objective is for  brazing of multiple joints on refrigerator pipes using induction heating. Equipment DW-UHF-6kw-III handheld induction heater Materials • copper pipes (Size 6 x 0.75 mm) • brazing rings – 1 mm (CuP7)
Process:  DW-UHF-6kw-III handheld induction heater can braze multiple joints located in predefined positions in the assembly. Brazing alloy rings are placed on the joints prior to the brazing process. The system can be integrated to accommodate different production line speeds and multiple assemblies. Results:
  • High quality and repeatability of the brazed joints.
  • Increased productivity.
  • Flexible system – can be easily re-programmed to accommodate different process requirements.
Induction Brazing Refrigerator Assembly Copper Pipes

Induction Heating Plasma

About Induction Heating Plasma


Plasma is characterized as an electrically neutral medium of unbound positive and negative particles, with an overall charge of roughly zero. Like a gas, plasma has no defined shape unless enclosed in a container. To generate plasma, we apply an electrical field to a gas, with the goal of removing electrons from their orbit around the nuclei. This creates a mix of ions and free-flowing electrons, which give the plasma key properties, including its electrical conductivity, a magnetic field, and sensitivity to external electromagnetic fields.
A key requirement for producing and sustaining plasma, is continued energy input. Induction is an ideal means of providing that continuous energy input for plasma generation. Some typical industrial applications for plasma include:
  • Plasma welding
  • Metal cutting
  • Surface treatments (plasma spray coating)
  • Etching in micro-electronics
To generate plasma, we apply an electrical field to a gas, with the goal of removing electrons from their orbit around the nuclei. These free-flowing electrons give the plasma key properties, including its electrical conductivity, a magnetic field, and sensitivity to external electromagnetic induction heating fields. induction plasma heating
https://dw-inductionheater.com/induction-heating-plasma.html?feed_id=225961&_unique_id=64f385e5ca1df

Induction Annealing Copper Tubes

Objective Uniformly high frequency annealing copper tubes simultaneously to 800°F (426°C) in under 10 seconds with induction heating.
Equipment DW-HF-45kw induction heater Helical coil Material • Two copper tubes – OD: 0.69’’ (1.75 cm) – ID: 0.55’’ (1.40 cm) – Length: 5.50’’ (14.0 cm). Key Parameters Power: 27kW Temperature: 842°F (450°C) Time: 5 sec
Process:
  1. The two copper tubes were placed together in the coil.
  2. Induction heating was applied for 5s.
Results/Benefits:
  • Improved process control for uniform induction heating to a desired temperature
  • Power on demand and rapid, consistent heat cycles
  • Technology without pollution, which is both clean and safe

Brazing Copper Bars with Induction

Brazing Copper Bars with Induction Objective: To braze bus bar assemblies together Material: • 2 copper bus bars 6" (152.4mm) wide, 2' (609.6mm)long, 2 copper bars 6"(152.4mm) wide, 18" (457.2)long & 3/8" (9.65mm) thick • braze shim preforms and white flux Temperature: 1292 ºF (700 ºC) Frequency: 80 kHz Equipment • DW-UHF-60KW induction heating system, equipped with a remote workhead containing eight 1.0 μF capacitors for a total of 2.0 μF. • An induction heating coil, designed and developed specifically for this application Process: A three-turn helical coil is used to heat the assembly. Three braze shim preforms are placed between the plates and white flux is applied to the assembly. It is heated for 5 minutes to evenly flow the braze alloy. A high current capable, aesthetic looking braze zone is produced. Results/Benefits Induction heating provides: • Consistently produced, quality parts • Heat into the part that is divided equally between the copper pieces, allowing for even flow and consistent use of braze • Hands-free operation that doesn't require skilled operators

2023年9月1日星期五

Aluminium Scraps Recycling Melting and Process

Aluminium Scraps Recycling Melting is the process by which scraps aluminium can be reused in products after its initial production. The process involves simply re-melting the metal, which is far less expensive and energy-intensive than creating new aluminium through the electrolysis of aluminium oxide (Al2O3), which must first be mined from bauxite ore and then refined using the Bayer process. Recycling scraps aluminium requires only 5% of the energy used to make new aluminium from the raw ore. For this reason, approximately 36% of all aluminium produced in the United States comes from old recycled scrap. Used beverage containers are the largest component of processed aluminum scraps, and most of it is manufactured back into aluminium cans. HLQ Induction Equipment Co provides the leading Aluminium Scraps Recycling Melting Furnace for recycling aluminium Scraps/cans/ingots and dross for industry aluminum recycling filed. Operation Steps:
  • A Aluminum scraps/ingots/cans recycling furnace operator will place aluminum parts or aluminum ingot/scrap as a charge in the induction melting aluminum recycling furnace and start the furnace to begin the melting process. Adding more aluminum charge this process is advisable as molten aluminum transmits the heat better.
  • When temperature of the aluminum reaches 1220.66°F it turns to liquid. Any residue from the coating and paint from the cans will float on the surface. This byproduct is called dross and can be skimmed by a steel ladle. This needs to cool before it can be disposed off safely.
  • Next, the crucible (furnace) will pour out pure aluminum. Usually, Hydraulic tilting mechanism provided to pour large quantities of liquid metals.
  • Finally, with care, the molten aluminum will be poured into mould to cool down and then slide out for use.
Advantages of induction aluminum scraps recycling furnace: 1, save energy and reduce the environmental temperature Original diesel furnace workshop on pollution, but also the auxiliary exhaust pipeline, inside and outside the furnace heat has a large number of distribution in the workshop, resulting in high temperature workshop. So is the original furnace condition, most escapes to the air, there is heat conduction loss, the production of large power consumption, increase the cost of production. At the same time, the ambient temperature increases. The electromagnetic induction heating process, the heating element is through magnetic field heating, in order to reduce the loss of heat conduction, fast heating, melting rapidly, thus reducing energy consumption. Reduce electricity consumption. After the comparison of the experimental test and modification, the power saving effect is 20%-40%. 2, rapid heating, temperature control accurate real-time Electromagnetic induction heating method is through the magnetic field lines make heating rapid heating, the rapid melting Aluminum Alloy. The temperature control is real-time and accurate, which improves the quality of the product and improves the production efficiency! 3 and long service life, simple maintenance The traditional electric melting induction furnace heating method is to use resistance wire heating, resistance wire in the high temperature environment for a long time in the use of oxidation will result in reducing its service life, high maintenance costs. The electromagnetic heating coil is made of insulating material and high temperature wire, so the service life is long and without any maintenance. 4, power Electromagnetic induction heating with the development and maturity of the technology, the production process and technology of components, software, such as reliable protection of the current power can be 2-200KW. 5, safe The utility model adopts the electromagnetic induction heating, which can reduce the surface temperature of the machine, and the human body can be safely touched, so as to avoid the occurrence of burn and scald accidents caused by the traditional heating mode and protect the production safety of the employees. Features 1 energy saving and environmental protection, Germany's IGBT power devices, high reliability, stable operation and low maintenance costs. 2) the frequency of the digital phase locked loop tracking, automatic load impedance matching. 3 power closed-loop control, to avoid the temperature change caused by the power down. 4) over voltage, under voltage, lack of phase, over current, over heat protection, real-time display of the parameters, fault diagnosis and alarm; leakage automatic alarm, cut off the power supply and the working state of real-time display. 5) PID heating control system, uniform heating temperature, prevent molten aluminum temperature drift, burning less, homogeneous metal components to improve the product qualification rate. 6 (LED) digital temperature controller, measuring and controlling the temperature accuracy of up to 3 degrees centigrade, the quality of aluminum soup is good, the melting temperature rises quickly, the furnace temperature is easy to control, the production efficiency is high; 7) the integral structure of polycrystalline mullite fibers of furnace, small volume, good insulation property, low energy consumption, high efficiency, temperature above 1200 degrees, long service life; 8. The operation is simple and the power can be adjusted with the work; 9 (100%) load duration, maximum power, to ensure the operation of 24 hours. Melting capacity of SMJD series electric aluminum scraps recycling melting furnace:  
Type Input Power Melting Capacity Max Temperature
steel, stainless steel copper, gold, silver (scrap, Slag) aluminum, aluminum alloy, Aluminum scrap, Aluminum slag, pop can 1800℃
SMJD-463 60 KW 200 KG 500 KG 200 KG
SMJD-480 60 KW 150 KG 500 KG 150 KG
SMJD-580 80 KW 200 KG 600 KG 200 KG
SMJD-600 60 KW 230 KG 560 KG 230 KG
SMJD-900 120 KW 300 KG 900 KG 300 KG
SMJD-905 80 KW 300 KG 900 KG 300 KG
SMJD-1250 80 KW 400 KG 1200 KG 400 KG
SMJD-1250 120 KW 450 KG 1350 KG 450 KG
SMJD-1500 120 KW 500 KG 1500 KG 500 KG
SMJD-1550 120 KW 520 KG 1560 KG 520 KG
SMJD-1700 160KW 600 KG 1700 KG 600 KG
SMJD-2300 160KW 800 KG 2000 KG 800 KG
SMJD-3100 200KW 1200 KG 3000 KG 1200 KG
[pdf-embedder url="https://dw-inductionheater.com/wp-content/uploads/2018/10/SMJD-melting-aluminum-furnace-parameter.pdf" title="SMJD melting aluminum furnace parameter"] Induction Aluminum smelter Aluminum melting furnace with induction Aluminum melting furnace Aluminium Melting furnace aluminum cans melting recycling aluminum scraps recycling melting process[pdf-embedder url="https://dw-inductionheater.com/wp-content/uploads/2019/03/Aluminium-Scraps-Recycling-Melting-Process.pdf" title="Aluminium Scraps Recycling Melting Process"] https://dw-inductionheater.com/aluminium-scraps-recycling-melting-and-process.html?feed_id=225811&_unique_id=64f218356a8f2

Induction Soldering Copper Tube

Induction Soldering Copper Tube With High Frequency Heating Units Objective: To heat a section of 3/8" copper tubing along with a 900 elbow for soldering. The copper tubing is to be used in Ice Machine Evaporator Assemblies, and soldering takes place after the tubes have been placed within the assembly. Heating must take place in a channel type coil to provide easy access, once the tubing has been installed. Solder can be manually fed after temperature has been reached. Material: 3/8" Thin Walled Copper Tubing and 900 Elbow Temperature: 6000F Application: Through the use of the DW-UHF-20kW output solid state induction power supply and a unique three (3) turn channel coil, the following results were achieved: 6000F was reached in 10 seconds. A quality solder joint was observed with adequate flow and surface texture. Equipment: DW-UHF-20kW output solid state induction power supply including one (1) remote heat station containing one (1) 1.2 μF capacitor, and a unique three (3) turn channel coil. Frequency: 200 kHz induction soldering copper tube

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.