https://dw-inductionheater.com/induction-brazing-carbide-onto-steel-part.html?feed_id=270735&_unique_id=67bd2b8c328d1
2025年2月24日星期一
Induction Brazing Carbide Onto Steel Part
https://dw-inductionheater.com/induction-brazing-carbide-onto-steel-part.html?feed_id=270735&_unique_id=67bd2b8c328d1
2025年2月16日星期日
Induction Brazing Steel Parts to Tungsten Carbide Plate
https://dw-inductionheater.com/induction-brazing-steel-parts-to-tungsten-carbide-plate.html?feed_id=269865&_unique_id=67b24b1830232
2025年1月26日星期日
2025年1月19日星期日
induction brazing steel carbide cap to shaft
https://dw-inductionheater.com/induction-brazing-steel-carbide-cap-to-shaft.html?feed_id=267081&_unique_id=678cb88b7c7ee
2024年11月24日星期日
2024年7月9日星期二
Induction Brazing Carbide
Induction Brazing Carbide File
Objective: Induction Brazing carbide rotary file assemblies with uniform concentricity in an aerospace application
Material • Carbide blank • High speed steel shank • Temperature indicating paint • Braze shim and black flux
Temperature 1400°F (760°C)
Frequency 550 kHz
Equipment: DW-UHF-4.5kw induction heating system, equipped with a remote heat station containing two 0.33 μF capacitors (total 0.66 μF) An induction heating coil designed and developed specifically for this application.
Process A multi-turn helical coil is used. The part is heated to determine the time required to reach the desired temperature and required heat pattern. It takes approximately 30 - 45 seconds to reach 1400°F (760°C) depending on the various part sizes. Flux is applied to the entire part. A braze shim is sandwiched between the steel shank and carbide. Induction heating power is applied until the braze flows. With proper fixturing, concentricity of the part can be achieved.
Results/Benefits • Repeatable, consistent precise heat.
https://dw-inductionheater.com/induction-brazing-carbide-file.html?feed_id=253337&_unique_id=668d6f6a2c054
2024年7月2日星期二
Brazing carbide shaft with induction
Brazing carbide shaft with induction
Objective: Braze a carbide shaft to a steel tube
Material: Carbide shaft 1/8" to 1" diameter (varying sizes) Steel tube 3/8" to 1 ¼" OD Silver solder braze
Temperature: indicating paint
Temperature: 1400 °F for 60 seconds Frequency300 kHz
Equipment: DW-UHF-6KW-III, 150-400 kHz solid state induction heating system equipped with a remote heat station containing two 0.66 μF capacitors (total 1.32 μF) A multi-turn helical coil
Process: Silver solder is applied to where the carbide shaft and steel tube meet. The clearance between the two parts is approximately .0005". A small piece of solder braze is placed on the part and then the part is heated. It takes about 60 seconds to flow the braze with the best heat migration and solder flow. Even though the part can be heated faster, optimal results are obtained at 60 seconds.
Results/Benefits: Induction heating provides even, precise heat. Precise directed heat is required for the solder braze to flow evenly around the part to assure a good joint.
https://dw-inductionheater.com/brazing-carbide-shaft-with-induction.html?feed_id=252358&_unique_id=6684270e9841c
2024年6月26日星期三
Brazing Carbide To Steel With Induction
Brazing Carbide To Steel With Induction
Objective: Braze carbide rotary file assemblies with uniform concentricity in an aerospace application
Material :
• Carbide blank
• High speed steel shank
• Temperature indicating paint
• Braze shim and black flux
Temperature 1400°F (760°C)
Frequency 252 kHz
Equipment DW-UHF-10kw induction heating system, equipped with a remote heat station containing two 0.33 μF capacitors (total 0.66 μF) An induction heating coil designed and developed specifically for this application.
Process A multi-turn helical coil is used. The part is heated to determine the time required to reach the desired temperature and required heat pattern. It takes approximately 30 - 45 seconds to reach 1400°F (760°C) depending on the various part sizes. Flux is applied to the entire part. A braze shim is sandwiched between the steel shank and carbide. Induction heating power is applied until the braze flows. With proper fixturing, concentricity of the part can be achieved.
Results/Benefits • Repeatable, consistent precise heat.
https://dw-inductionheater.com/brazing-carbide-to-steel-with-induction.html?feed_id=251678&_unique_id=667d02fb8f6ce
2024年6月25日星期二
Brazing Carbide Tool Tips With Induction
Brazing Carbide Tool Tips With Induction
Objective: Attaching carbide cutters to a steel meat cutter impeller
Material carbide blocks; steel shank fitting
Temperature 1400 °F (760 °C)
Frequency 300 kHz
Equipment DW-UHF-30KW induction heating systems including: Induction heating coil Workhead: two-cap 1.0μF (Total 0.5 μF) Process The entire part is placed in a five-turn helical coil, the power is applied until the part is heated to the required temperature and a uniform heat pattern is achieved. The coil allows for easy fixturing and uniformity of heating between the carbide and the steel shank for a premium braze joint.
Results/Benefits
Precision: Due to the size of the induction coil, the process allows for precise placement of the carbides on the steel shanks
Economy: Power is consumed only during the heat cycle
Repeatability: joint quality is maintained in this repeatable process
https://dw-inductionheater.com/brazing-carbide-tool-tips-with-induction.html?feed_id=251542&_unique_id=667b95093f9fb
2024年6月20日星期四
Brazing Carbide To Steel Shank
Brazing Carbide To Steel Shank with Induction
Objective :Brazing carbide teeth to a steel jaw in less than 5 minutes
Material: Steel pipe jaw, 0.5” (12.7mm) dia, 1.25” (31.75mm) long, 0.25”(6.35mm) thick carbide teeth, black flux and silver copper braze shims
Temperature: 1292ºF (700ºC)
Frequency: 300kHz
Equipment • DW-UHF-10kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor
• An induction heating coil designed and developed specifically for this application.
Process: A two turn rectangular helical coil is used to heat the carbide and steel to 1292ºF (700ºC) for 4 to 5 minutes. Three braze shims control the amount of braze and the even heat allows for
a good flow of braze creating an aesthetically pleasing bond.
Results/Benefits Induction heating provides:
• Hands-free heating that involves no operator skill for manufacturing
• Consistent, repeatable aesthetically pleasing brazes
• Even distribution of heating
https://dw-inductionheater.com/brazing-carbide-to-steel-shank.html?feed_id=250672&_unique_id=6674711612cba
2024年6月13日星期四
Induction Brazing Steel To Carbide Plate
Induction Brazing Steel To Carbide Plate
Objective Brazing a steel piston valve assembly
Material Steel piston valve 4.5” dia (11.43cm), tungsten carbide plate and braze
Temperature 1350 ºF
Frequency 100 kHz
Equipment •DW-UHF-40kW induction heating system, equipped with a remote workhead containing six 1.0μF capacitors for a total of 1.5μF
• An induction heating coil designed and developed specifically for this application.
Process A five turn pancake coil is used to braze the piston valve and tungsten carbide plate. The assembly was heated for 10 minutes to flow the braze and join the two pieces.
Results/Benefits Induction heating provides:
• Rapid localized heat, which can minimize oxidation and reduce cleaning after joining
• Hands-free heating that involves no operator skill for manufacturing
• Clean and controllable joints
• Produces high quality repeatable parts
https://dw-inductionheater.com/induction-brazing-steel-to-carbide.html?feed_id=249813&_unique_id=666bdf20c06c2
2020年5月18日星期一
induction brazing steel carbide cap to shaft
Objective
High Frequency Induction brazing steel carbide cap to shaft. Customer currently uses a torch process, but would like to change to induction brazing in order to reduce scrap and rework and improve the quality of the braze.
Equipment
DW-UHF-6kw-III handheld induction brazing heater
Materials
• Carbon steel
• magnetic carbide caps
• Alloy – EZ Flo 3 paste
• Test 1: Shaft Diameter: 0.5” (12.7 mm)
• Test 2: Shaft Diameter: 0.375” (9.525mm)
• Test 3: Shaft Diameter: 0.312” (7.925mm)
Key Parameters
Test 1: Shaft Diameter: 0.5” (12.7mm)
Temperature: Approximately 1450°F (788°C)
Power: Pre-curie – 3.3 kW
Time: 11 seconds
Key Parameters
Test 2: Shaft Diameter: 0.375” (9.525mm)
Temperature: Approximately 1450°F (788°C)
Power: Pre-curie – 1.8 kW
Time: 8 seconds
Key Parameters
Test 3: Shaft Diameter: 0.312” (7.925mm)
Temperature: Approximately 1450°F (788°C)
Power: Pre-curie – 1.7 kW
Time: 7.5 seconds
Process:
- Paste alloy was applied to the cone shape top of each steel shaft.
- The cap was set on top and rotated to distribute the paste alloy.
- Each assembly was positioned in the coil and heated.
- Preliminary heat tests were conducted using tempilaq paint to estimate the heat cycle to 1450 degrees F.
Results/Benefits:
- Precise control of the time and temperature resulting in improved quality and consistent result
- Power on demand with rapid heat cycles
- Repeatable process, not operator dependent
- Safe induction heating with no open flames
- Energy efficient heating
https://dw-inductionheater.com/wp-content/uploads/2020/05/induction-brazing-steel-carbide-cap.png?v=1589810073
https://dw-inductionheater.com/induction-brazing-steel-carbide-cap-to-shaft.html
brazing carbide joints, brazing steel carbide, HF brazing carbide process, HF brazing steel carbide system, high frequency brazing carbide system, induction brazing carbide, induction brazing carbide machine, induction brazing steel, induction brazing steel machine, steel carbide
2020年4月22日星期三
Induction Brazing Carbide To Steel
Objective
Induction Brazing carbide to steel parts
Equipment
DW-HF-15kw Induction Heating Power Supply
HLQ custom coil
Key Parameters
Power: 5.88 kW
Temperature: Approximately 1500°F (815°C)
Time: 10 sec
Materials
Coil-
2 helical turns (20 mm ID)
1 planar turn (40 mm OD, 13 mm Height)
Carbide-
13 mm OD, 3 mm wall thickness
Steel piece–
20 mm OD, 13 mm ID
Process:
- To demonstrate elimination of “hand feeding” the alloy, we formed the alloy into a ring to tightly fit over the center post tube. This method provides a uniform amount for each cycle, resulting in uniform joints and wetting.
- The custom made coil was then placed over the steel piece, where is was set for 10 seconds to heat the alloy.
- The alloy was heated at approximately 1500°F (815)°C
- The whole piece is left alone and cooled with ambient air

Results/Benefits:
- Induction Brazing was successful all in under 15 seconds with 8kW
- High quality and repeatability of the brazed joints
- Increased productivity
- Rings will need to be developed for specific joints to prevent the use of too much alloy
- Precise control of the time and temperature
https://dw-inductionheater.com/wp-content/uploads/2020/04/induction-brazing-carbide-to-steel-part-process-1024x819.png
https://dw-inductionheater.com/induction-brazing-carbide-to-steel-parts.html
brazing carbide, brazing carbide machine, Brazing carbide to steel, carbide to steel brazing, HF brazing carbide, high frequency brazing carbide, induction brazing carbide, Induction Brazing Carbide to Steel, induction soldering carbide, radio frequency brazing carbide, soldering carbide to steel
2020年3月28日星期六
Induction Brazing Steel Parts to Tungsten Carbide Plate
Induction Brazing Steel Parts to Tungsten Carbide Plate
Objective
Induction Brazing of Steel Parts to a Tungsten Carbide Plate
Equipment
DW-UHF-6KW-III handheld induction brazing machine
Test 1
Materials
• Steel rod: 19.05 mm (0.75″) OD, 82.55 mm (3.25″) Length
• Tungsten Carbide Plate: 38.1 mm (1.5″) OD, 10.16 mm (0.4″) Thickness
• Alloy: 19.05 mm (0.75″) Brazing discs
Power: 4.0 kW
Temperature: Approximately 760° C (1400° F)
Time: 40 sec
Test 2
Materials
• Steel rod: 12.7 mm (0.50″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 19.05 mm (0.75″) OD, 6.35 mm (0.25″) Thickness
• Alloy: 12.7 mm (0.50″) Brazing discs
Power: 2.36 kW
Temperature: Approximately 760° C (1400° F)
Time: 23 sec
Test 3
Materials
• Steel rod: 12.7 mm (0.50″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 1″ OD, 1.39mm (0.055″) Thickness
• Alloy: 12.7 mm (0.50″) Brazing discs
Power: 2.36 kW
Temperature: Approximately 760° C (1400° F)
Time: 20-25 sec (Pulsing on/off)
Test 4
Materials
• Steel rod: 6.35 mm (0.25″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 21.08mm (0.83″) OD, 1.65mm (0.065″) thicknes
• Alloy: 6.35 mm (0.25″) Brazing discs
Power: 1.96 kW
Temperature: Approximately 760° C (1400° F)


Time: 20 sec (Pulsing on/off)
Results and Conclusions:
Brazing of different steel parts to carbide disks is possible with one induction coil. Power was regulated by turning the heat on and off using a foot switch to prevent overheating of the carbide parts.
https://dw-inductionheater.com/wp-content/uploads/2020/03/4C736463-2605-4E33-8201-8092BCECA194-1024x633.jpeg
https://dw-inductionheater.com/induction-brazing-steel-parts-to-tungsten-carbide-plate.html
brazing carbide, brazing steel, brazing steel parts, Brazing tungsten carbide, High Frequency Brazing steel, induction brazing carbide, induction brazing steel, steel brazing
关注者
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.











