https://dw-inductionheater.com/induction-brazing-carbide-to-stainless-steel.html?feed_id=273809&_unique_id=67e4b8875b247
2025年3月26日星期三
Induction Brazing Carbide To Stainless Steel
Induction Brazing Carbide To Stainless Steel
https://dw-inductionheater.com/induction-brazing-carbide-to-stainless-steel.html?feed_id=273809&_unique_id=67e4b8875b247
https://dw-inductionheater.com/induction-brazing-carbide-to-stainless-steel.html?feed_id=273809&_unique_id=67e4b8875b247
2025年2月24日星期一
Induction Brazing Carbide Onto Steel Part
Induction Brazing Carbide Onto Steel Part
https://dw-inductionheater.com/induction-brazing-carbide-onto-steel-part.html?feed_id=270735&_unique_id=67bd2b8c328d1
https://dw-inductionheater.com/induction-brazing-carbide-onto-steel-part.html?feed_id=270735&_unique_id=67bd2b8c328d1
2025年1月27日星期一
2025年1月26日星期日
2024年7月9日星期二
Induction Brazing Carbide
Induction Brazing Carbide File
Objective: Induction Brazing carbide rotary file assemblies with uniform concentricity in an aerospace application
Material • Carbide blank • High speed steel shank • Temperature indicating paint • Braze shim and black flux
Temperature 1400°F (760°C)
Frequency 550 kHz
Equipment: DW-UHF-4.5kw induction heating system, equipped with a remote heat station containing two 0.33 μF capacitors (total 0.66 μF) An induction heating coil designed and developed specifically for this application.
Process A multi-turn helical coil is used. The part is heated to determine the time required to reach the desired temperature and required heat pattern. It takes approximately 30 - 45 seconds to reach 1400°F (760°C) depending on the various part sizes. Flux is applied to the entire part. A braze shim is sandwiched between the steel shank and carbide. Induction heating power is applied until the braze flows. With proper fixturing, concentricity of the part can be achieved.
Results/Benefits • Repeatable, consistent precise heat.
https://dw-inductionheater.com/induction-brazing-carbide-file.html?feed_id=253337&_unique_id=668d6f6a2c054
2024年6月20日星期四
Brazing Carbide To Steel Shank
Brazing Carbide To Steel Shank with Induction
Objective :Brazing carbide teeth to a steel jaw in less than 5 minutes
Material: Steel pipe jaw, 0.5” (12.7mm) dia, 1.25” (31.75mm) long, 0.25”(6.35mm) thick carbide teeth, black flux and silver copper braze shims
Temperature: 1292ºF (700ºC)
Frequency: 300kHz
Equipment • DW-UHF-10kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor
• An induction heating coil designed and developed specifically for this application.
Process: A two turn rectangular helical coil is used to heat the carbide and steel to 1292ºF (700ºC) for 4 to 5 minutes. Three braze shims control the amount of braze and the even heat allows for
a good flow of braze creating an aesthetically pleasing bond.
Results/Benefits Induction heating provides:
• Hands-free heating that involves no operator skill for manufacturing
• Consistent, repeatable aesthetically pleasing brazes
• Even distribution of heating
https://dw-inductionheater.com/brazing-carbide-to-steel-shank.html?feed_id=250672&_unique_id=6674711612cba
2020年4月22日星期三
Induction Brazing Carbide To Steel
Objective
Induction Brazing carbide to steel parts
Equipment
DW-HF-15kw Induction Heating Power Supply
HLQ custom coil
Key Parameters
Power: 5.88 kW
Temperature: Approximately 1500°F (815°C)
Time: 10 sec
Materials
Coil-
2 helical turns (20 mm ID)
1 planar turn (40 mm OD, 13 mm Height)
Carbide-
13 mm OD, 3 mm wall thickness
Steel piece–
20 mm OD, 13 mm ID
Process:
- To demonstrate elimination of “hand feeding” the alloy, we formed the alloy into a ring to tightly fit over the center post tube. This method provides a uniform amount for each cycle, resulting in uniform joints and wetting.
- The custom made coil was then placed over the steel piece, where is was set for 10 seconds to heat the alloy.
- The alloy was heated at approximately 1500°F (815)°C
- The whole piece is left alone and cooled with ambient air

Results/Benefits:
- Induction Brazing was successful all in under 15 seconds with 8kW
- High quality and repeatability of the brazed joints
- Increased productivity
- Rings will need to be developed for specific joints to prevent the use of too much alloy
- Precise control of the time and temperature
https://dw-inductionheater.com/wp-content/uploads/2020/04/induction-brazing-carbide-to-steel-part-process-1024x819.png
https://dw-inductionheater.com/induction-brazing-carbide-to-steel-parts.html
brazing carbide, brazing carbide machine, Brazing carbide to steel, carbide to steel brazing, HF brazing carbide, high frequency brazing carbide, induction brazing carbide, Induction Brazing Carbide to Steel, induction soldering carbide, radio frequency brazing carbide, soldering carbide to steel
订阅:
博文 (Atom)
关注者
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.




