Induction Brazing Steel Parts to Tungsten Carbide Plate
Objective Induction Brazing of Steel Parts to a Tungsten Carbide Plate Equipment DW-UHF-6KW-III handheld induction brazing machine
Test 1
Materials
• Steel rod: 19.05 mm (0.75″) OD, 82.55 mm (3.25″) Length
• Tungsten Carbide Plate: 38.1 mm (1.5″) OD, 10.16 mm (0.4″) Thickness
• Alloy: 19.05 mm (0.75″) Brazing discs
Power: 4.0 kW
Temperature: Approximately 760° C (1400° F)
Time: 40 sec
Test 2
Materials
• Steel rod: 12.7 mm (0.50″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 19.05 mm (0.75″) OD, 6.35 mm (0.25″) Thickness
• Alloy: 12.7 mm (0.50″) Brazing discs
Power: 2.36 kW
Temperature: Approximately 760° C (1400° F)
Time: 23 sec
Test 3
Materials
• Steel rod: 12.7 mm (0.50″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 1″ OD, 1.39mm (0.055″) Thickness
• Alloy: 12.7 mm (0.50″) Brazing discs
Power: 2.36 kW
Temperature: Approximately 760° C (1400° F)
Time: 20-25 sec (Pulsing on/off)
Test 4
Materials
• Steel rod: 6.35 mm (0.25″) OD, 76.2 mm (3″) Length
• Tungsten Carbide Plate: 21.08mm (0.83″) OD, 1.65mm (0.065″) thicknes
• Alloy: 6.35 mm (0.25″) Brazing discs
Power: 1.96 kW
Temperature: Approximately 760° C (1400° F)
Time: 20 sec (Pulsing on/off)
Time: 20 sec (Pulsing on/off)
Results and Conclusions:
Brazing of different steel parts to carbide disks is possible with one induction coil. Power was regulated by turning the heat on and off using a foot switch to prevent overheating of the carbide parts.
