2023年3月28日星期二

induction soldering copper tubing to brass valves

High frequency induction soldering copper tubing to brass valves

Objective: Test: Induction Soldering copper tubing to brass valves Industry: HVAC Materials: Copper and brass pipes
Equipment: DW-HF-25kw induction heating machine Power: 16 kW Temperature932oF (500oC) Time: 20 seconds Coil: Coated custom-made coil.
The Process:
This application request was brought to HLQ Induction Heating Power’s attention by a HVAC company. Their goal was to eliminate their current use of the torch method, as well as remove defects and improve the safety for operators. To start the test, our applications engineer assembled the setup of copper tubing and brass valves. After applying flux to each joint the engineer heated them for 20 seconds. Solder was manually applied after the joints reached 932oF (500C), and created an even solder around the joints.  The use of induction heating was successful in this HVAC application.

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.