2022年5月23日星期一

Induction Brazing Copper to Stainless Steel Process

High Frequency Induction Brazing Copper to Stainless Steel Process Technology

Objective The objective of this induction brazing copper to stainless steel using a DW-UHF-40kw induction heating power supply with a custom heating station Equipment DW-UHF-40KW Induction Heating Power Supply HLQ custom coil Key Parameters Power: 23.65 kW Temperature: Approximately 1300°F (704)°C Time: 3.5 mins
Materials Cooper 4.5″ OD 0.5″ Wall Thickness Stainless Steel  4″ OD Braze Joint 2″
Process: In order to start the induction brazing of copper to stainless steel the part was centered on a turntable. The induction brazing coil was then positioned around the copper because it is less efficiently heated than stainless steel. As the part was rotating, approximately 25kW were being applied to the coil. Once the brazed joint was close to the ideal brazing temperature, the alloy was hand fed onto the joint. The induction brazing of cooper to stainless steel was completed and successful.
Results/Benefits: The result of the induction brazing copper to stainless steel application testing was a positive one, the induction brazing was completed and the copper to stainless steel was done seamlessly. This test resulted in high quality and repeatability of the brazed joints, increased productivity and control of the time and temperature.
 

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.