2022年5月11日星期三

Induction Preheating Steel Tubes

Induction Preheating Steel Tubes

Objective Induction preheating steel tubes with diameters of 14mm, 16mm, and 42mm (0.55”, 0.63”, and 1.65”). A 50mm (2″) length of the tube much be heated to 900°C (1650°F) in under 30 seconds.
Equipment DW-UHF-6KW-III handheld induction heater Materials • Steel tubes with ODs: 14mm, 16mm and 42mm (0.55”, 0.63”, and 1.65”) • Wall thicknesses: 1mm, 2mm, and 2mm (0.04″, 0.08″, 0.08″) Key Parameters Power: 5 kW for 42mm tube, 3 kW for 14 and 16 mm tubes Temperature: 1740°F (950°C) Time: 26 sec.
Process:
  1. Insert steel tube into the coil.
  2. Apply induction heat for 26 seconds.
  3. Remove the tube from the coil.
Results/Benefits: The desired preheating temperature was achieved for less than 30 seconds for the three different steel tubes. Our 5 kW induction system can be used for successfully preheating of steel tubes with different diameters and thicknesses.

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.