2022年5月21日星期六

Inductioin Shrink Fitting Aluminum Pulley

Inductioin Shrink Fitting Aluminum Pulley With IGBT Heating Units Objective Heat aluminum pulley for insertion of an inner bearing for the automotive industry Material Aluminum pulley 2.3” (60mm) OD x 1.6” (40mm) ID x 1” (27mm) high and inner bearing 0.7” (17.8mm) high x 1.6” (40mm) dia Temperature 464 ºF (240 ºC) Frequency 283 kHz Equipment • DW-UHF-4.5kW induction heating system, equipped with a remote workhead containing two 0.33μF capacitors for a total of 0.66μF • An induction heating coil designed and developed specifically for this application. Process A three turn helical coil is used to heat the aluminum pulley. The pulley is heated to 464 ºF (240 ºC) in 20 seconds to expand the inner diameter and then the inner bearing is inserted to form the completed part. Results/Benefits Induction heating provides: • Defined and controlled heat pattern • Process easily integrated into automated system • Even distribution of heating shrink fitting aluminum bearing  

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.