Induction Handheld Brazing Copper To Steel Tube

Objective Braze copper cylinders, copper wires, and steel tubes in under 20 seconds using the DW-UHF-6KW-III handheld induction heating system. Equipment DW-UHF-6KW-III handheld induction heating system Test 1 Materials • Copper cylinder to copper wire. Power: 6.6kW Temperature: 871° C (1600° F) Time: 20 sec Test 2 Materials • Copper cylinder to steel tube. Power: 10 kW Temperature: 871° C (1600° F) Time: 10 to 11 sec Results and Conclusions: It is recommended to use brazing alloy preforms / rings instead of a brazing rod. This allows the user to use both hands to hold the U-Braze. It also improves the quality of the braze and repeatability by distributing the correct amount of alloy all around the braze joint every time. When brazing copper to steel, it is best to preheat the copper to avoid overheating the steel piece since the copper is harder to heat.   [wpforms id="3947"] https://dw-inductionheater.com/induction-handheld-brazing-copper-to-steel-tube.html?feed_id=240602&_unique_id=661409426faca