2024年2月20日星期二

Induction Preheating Steel Tubes

Induction Preheating Steel Tubes

Objective Induction preheating steel tubes with diameters of 14mm, 16mm, and 42mm (0.55”, 0.63”, and 1.65”). A 50mm (2″) length of the tube much be heated to 900°C (1650°F) in under 30 seconds.
Equipment DW-UHF-6KW-III handheld induction heater Materials • Steel tubes with ODs: 14mm, 16mm and 42mm (0.55”, 0.63”, and 1.65”) • Wall thicknesses: 1mm, 2mm, and 2mm (0.04″, 0.08″, 0.08″) Key Parameters Power: 5 kW for 42mm tube, 3 kW for 14 and 16 mm tubes Temperature: 1740°F (950°C) Time: 26 sec.
Process:
  1. Insert steel tube into the coil.
  2. Apply induction heat for 26 seconds.
  3. Remove the tube from the coil.
Results/Benefits: The desired preheating temperature was achieved for less than 30 seconds for the three different steel tubes. Our 5 kW induction system can be used for successfully preheating of steel tubes with different diameters and thicknesses.
https://dw-inductionheater.com/induction-preheating-steel-tubes.html?feed_id=234430&_unique_id=65d53192df241

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.