2020年5月5日星期二

Mini inductor heater

Mini inductor heater-small handheld ductor heater-Magnetic Inductor tool releases stuck and rusted lug nuts, bolts and fasteners in auto, trucking, farming, boat repair.


mini induction heater


Product Description:


The Mini handheld inductor heater-handheld ductor heater-Magnetic Inductor. KIA-1000W uses magnetic induction heating technology to heat treat small parts on automobiles, machinery, various metal parts and polyethylene. It is mainly used to heat various automotive rusty bolts, nuts, gears, Pulleys, pulleys, bearings, sensors, etc. There is no open flame, no need to avoid various flammable materials such as plastics; no water cooling, safe operation, simple use and easy to carry.


mini induction heater


Features:


Stable heating, easy to use outdoors and indoors. No burning, safety protection of other components, improve work efficiency. It does not damage the parts near the heating. It will not damage the surrounding parts through rubber or plastic. No open flame. Principle: The use of metal and non-metal heating in the electromagnetic field can turn a screw into a red induction heating device within 20 seconds. No open flame heating to ensure the safety of your operation. The rubber and adhesive materials can also be heated and peeled off by the instrument accessories. Scope of use: screw removal of power towers, screw removal of high-voltage electrical appliances, sturdy switch of screws, screw removal of transformers, screw removal at various positions, removal of vinyl stripes without solvent or rubber, removal of hoses and AC routing, heating and expanding bearings The thinness of the belt makes it easy to install, rust, and deformed screw removal, and can be used in the disassembly of various industries and equipment.


This machine is not only suitable for car repair shop, 4S shop, motorcycle repair shop, factory production line maintenance, mechanical maintenance, precision instrument equipment maintenance, unit maintenance department, logistics department, hardware store, but also for tool brazing, diamond tool brazing , Heat treatment of small parts, a small amount of precious metal (gold, silver, etc.) smelting, a small amount of stainless steel smelting, etc.



Applications:



  1. Disassembly of various sizes of rusty screw bolts.

  2. Heat treatment of car corrosion bolts, nuts, gears, pulleys, pulleys, bearings.

  3. Heat treatment of hardware tools high frequency quenching machine, such as vise, hammer, pliers, wrench.

  4. Heating and disassembly of various production lines, mechanical equipment, precision instrument parts.

  5. High frequency quenching heat treatment of various power tool gear shafts.

  6. Welding of carbide saw blades with large and small teeth.

  7. Silver frame, parts welding, annealing.

  8. Welding of jewelry clocks.

  9. Electronics industry: extremely fine wires, various electronic components, fine parts, silver and silver soldering.

  10. Mechanical and electrical industry: fine metal joints, silver-copper welded micro motors, shafts and other quenching and tempering.

  11. Wire industry: wire strip induction annealing.

  12. Toy industry: Clockwork thin metal sheet is tempered.

  13. Welding of knives: paper knives and shoe blades are quenched.

  14. Various woodworking tools, such as: axe, planer and other heat treatment

  15. Hydraulic components such as plunger of plunger pump, rotor of rotor pump, reversing shaft on various valves, gear of gear pump and other high-frequency quenching.

  16. Heat treatment of various steam and motorcycle high frequency quenching machines, such as: crankshaft, connecting rod, piston pin, camshaft, valve, various gears in gearbox, various forks, various spline shafts, transmission High frequency induction quenching heat treatment of shafts, various small shaft crank pins, various rocker arms, rocker shafts, etc.        


Precautions:



  1. This product can be heated to 800 degrees instantaneously, no open flame is generated, no water cooling is required, and the operation is convenient.

  2. If it is not intentionally damaged or improperly operated, the product is guaranteed for 1 year



Parameter:





















































TypeKIA-1KW
Work powerSingle phase110v ,50Hz/60Hz

Single phase 220V ,50Hz/ 60Hz

The range of operating voltage100V-120V

200V-240V

Output power1KW
Fluctuating frequency30-100KHZ
Output current10A
Cooling WayAir cooling
Temperature protection point85 ℃
CertificationCE,UL,CCC,Available for COC,POVC
Duty cycle100%
Weight3kg
Size380mm*64mm

The accessories come with Mini Induction heater.


 

























Dia 30mm Coil2 pieces
Dia 40mm Coil2 pieces
Dia 50mm Coil2 pieces
Length 750mm cable for DIY coil2 pieces
Coil for Plate heating2 pieces

Mini induction unscrew remover heater-handheld induction unscrew remover heater-Mini induction derusty heater


 



 


 



https://dw-inductionheater.com/wp-content/uploads/2020/04/Mini-induction-unscrew-remover-heater-handheld-induction-unscrew-remover-heater-Mini-induction-derusty-heater-handheld-induction-derusty-heater.png?v=1587954676
https://dw-inductionheater.com/Mini-induction-heater.html
handheld induction heater, HLQ induction heater, induction heater, induction heater designer, induction heater manufacturer, induction heater supplier, mini induction heater, mobile induction heater, portable induction heater, small induction heater

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.