2021年12月2日星期四

Induction Preheating Rivets Of Carbide Steel

Induction Preheating Rivets of Carbide Steel With RF Induction Forming Heating Units

Objective Preheat low carbon steel rivets and handrail bars for reforming for construction Material Low carbon steel rivets 7/16” (11.1mm) dia x 1.5” (38mm) & 1.9” (47mm) long, low carbon bar 1.25” (32mm) dia x 3” (75mm) heat zone Temperature 1922 ºF (1050 ºC) Frequency 48 kHz for the rivets 55 kHz for the bars Equipment · DW-HF-25 kW induction heating system, equipped with a remote workhead containing two 1.5F capacitors for a total of 0.75F · An induction heating coil designed and developed specifically for this application. Process A Three turn encapsulated helical coil is used for the rivets and a four turn encapsulated helical coil is used for preheating the handrail bars. The rivets are heated to the 1922 ºF (1050 ºC) in 22-25 seconds and the bars are heated to the 1922 ºF (1050 ºC) in 4 mins 43 seconds. Results/Benefits Induction heating provides: · Controllable heat pattern · Ease of on site location use · Safe, no open flames · Even distribution of heating Induction-preheating-carbide-steel-rivets

2021年12月1日星期三

induction brazing stainless steel to copper

Objective Induction Brazing stainless steel to copper tubing. Objective is to evaluate induction brazing solution. Customer is looking to reduce defects and for a cleaner brazing environment. Due to different pipe size and lower volume – evaluation is performed with a induction brazing system.
Test1 Equipment DW-HF-25kw induction brazing machine Materials Copper to Stainless steel tube Power: 12.5kW Temperature: 1400ºF to 1600ºF (760ºC to 871ºC) Time: 9 to 11 seconds
Test2 Equipment DW-HF-25kw induction brazing machine Materials Copper to Stainless steel Power: 12.5kW Temperature: 1400ºF to 1600ºF (760ºC to 871ºC) Time: 9 to 11 seconds
Results and Conclusions: Induction brazing test with U open coil was able to braze the parts in 9 to 11 seconds for the full braze cycle. Operator training with this setup will be minimal.

Induction Preheating Steel Bar

Induction Preheating Steel Bar For Hot Forming With RF IGBT Induction Heater Objective Preheating round steel bar stock prior to forging a hot formed u-bolt Material .795” (20.19mm) diameter round steel bar stock 15” (381 mm) long Temperature 1500 ºF (816 ºC) Frequency 20 kHz Equipment • DW-MF-90kW induction heating system, equipped with a remote workhead containing eight 1.0μF capacitors for a total of 2.0μF • An induction heating coil designed and developed specifically for this application. Process A fifteen turn helical coil with ceramic insert is used to preheat the 15” (381 mm) section of steel bar stock. Power is supplied for 9.90 seconds to heat the whole piece to 1500 ºF (816 ºC). The piece is then placed in a die and formed into a u-bolt. Results/Benefits Induction heating provides: • Uniform through heating • High volume, rapid forging • Scale formation reduced, steel does not remain above oxidation temperature for long periods of time • Fast, energy-efficient heat induction preheating steel bar               induction-preheating-steel-bar

What is induction annealing?

What is induction annealing? This process heats metals that have already undergone significant processing. Induction annealing reduces hardness, improves ductility and relieves internal stresses. Full-body annealing is a process where the complete workpiece is annealed. With seam annealing (more accurately known as seam normalizing), only the heat-affected zone produced by the welding process is treated. What are the benefits? Induction annealing and normalizing delivers fast, reliable and localized heat, precise temperature control, and easy in-line integration. Induction treats individual workpieces to exact specifications, with control systems continuously monitoring and recording the entire process. Where is it used? Induction annealing and normalizing is widely used in the tube and pipe industry. It also anneals wire, steel strips, knife blades and copper tubing. In fact, induction is ideal for virtually any annealing task. What equipment is available? Each DAWEI Induction annealing system is built to satisfy specific requirements. At the heart of each system is an DAWEI Induction Heating generator that features automatic load matching and a constant power factor at all power levels. Most of our delivered systems also feature custom-built handling and control solutions. induction annealing tube

Induction Melting

What is induction melting? Induction melting is a process where metal is melted into liquid form in an induction furnace's crucible. The molten metal is then poured from the crucible, usually into a cast. What are the benefits? Induction melting is extremely fast, clean and uniform. When correctly performed, induction melting is so clean that it is possible to skip the purification stage necessary with other methods. The uniform heat induced in the metal also contributes to a high-quality end result. HLQ Induction melting furnace have advanced ergonomic features. They not only make workplaces safer, they increase productivity by making the melting process faster and more comfortable. Where is it used? DaWei Induction melting systems are used in foundries, universities, laboratories and research centers. The systems melt everything from ferrous and non-ferrous metals to nuclear material and medical/dental alloys. What equipment/furnace is available? HLQ Induction Heating Machine Co offers many different induction melting furnace ranges to suit a wide variety of melting needs: single-axis tiltpour, dual-axis tilt-pour, moving coil, rollover and laboratory.

Induction Annealing Copper Tubes

Simultaneously Induction Annealing Copper Tubes

Induction annealing copper tubesObjective Uniformly heat two copper tubes simultaneously to 800°F (426°C) in under 10 seconds with induction heating.
Equipment DW-HF-45kw induction heater Helical coil Material • Two copper tubes – OD: 0.69’’ (1.75 cm) – ID: 0.55’’ (1.40 cm) – Length: 5.50’’ (14.0 cm). Key Parameters Power: 35kW Temperature: 842°F (450°C) Time: 7sec
Induction annealing copper tubeProcess:
  1. The two copper tubes were placed together in the coil.
  2. Induction heat was applied for 8s.
Results/Benefits:
  • Improved process control for uniform heating to a desired temperature
  • Power on demand and rapid, consistent heat cycles
  • Technology without pollution, which is both clean and safe
High frequency Induction annealing copper tubes

Induction Melting Glass

Induction melting glass furnace with IGBT Induction Heating Equipment

Objective: To heat a metal susceptor vessel to 2200°F within 25 minutes for a fiberglass melting application Material: Metal susceptor vessel Temperature :2200°F Frequency:300 kHz Equipment:DW-MF-70kW RF Induction heating power supply, remote heat station and a specially-designed induction coil. Process: A specially-designed induction coil, shaped to conform to the metal vessel, was used to deliver uniform heat to the vessel. Initial tests were conducted to establish a heating pattern and time-to-temperature. RF induction heating power was applied for 11 minutes and the vessel reached a temperature of 2,200°F. An additional 3kW power supply was suggested for use when the glass in the vessel is emptied through the drain tube. Results: Uniform and repeatable results were achieved with the DAWEI induction heating power supply and coil. The vessel can be maintained at 2200°F so that glass can be melted for fiber drawing. induction melting glass

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.