显示标签为“carbidetips”的博文。显示所有博文
显示标签为“carbidetips”的博文。显示所有博文

2021年12月31日星期五

brazing carbide tips

Objective Induction brazing carbide tips onto milling cutter tools process
Equipment DW-UHF-20kw induction brazing machine Power: 11,5kW (max) Time: 10 sec (to brazing temperature)
Process Steps 1. Induction Heating to brazing temperature to remove stale tool 2. Removing old solder during heating 3. Braze new tool Results and Conclusions: 1. The delivered power to the load was more than enough and the test was performed successful 2. Coil bar connection between customer induction coil and our heat station was only for test purposes 3. Using of foot-switch for this application is useful for this application Conclusions: The induction heating machine performance exceeds customer expectations. The customer was very happy to reduce the time needed for worn carbide tips replacement.
  [wpforms id="3947"]

2021年12月26日星期日

brazing carbide tips with induction

Objective The objective of this application is to remove an old carbide tip from a steel work piece. After the removal of the carbide, brazing a new carbide tip onto the same steel work piece. Equipment DW-UHF-6KW handheld induction brazing heater
handheld inductino heater
Test 1 Removal  Materials: Carbide tipped work piece Power: 5 kW Temperature: 1450ºF (787ºC) Time: 30 seconds
Test 2 Replacement  Materials: Carbide tipped work piece  Power: 5 kW Temperature: 1450ºF (787ºC) Time: 30 seconds

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.