2023年7月8日星期六

Induction Brazing T Shaped Copper Tubing Assemblies

High Frequency Induction Brazing T Shaped Copper Tubing Assemblies

Objective: Test 1 – Induction brazing T-shaped copper tubing assemblies – 3 joints simultaneously Test 2 – Induction brazing copper tubing Industry: HVAC Materials: Copper tubers  6, 8, 10, 12 mm ( 01564, 0516, 025⁄64, 015⁄32inch. ); thickness: 1 mm ( 0364 inch.) Alloy: Cu-P-Ag rings TIP: The use of alloy rings is highly recommended with a hand-held brazing gun.
Equipment: DW-UHF-20kw induction brazing machine Power: Test 1 ( 7-8kW ) Test 2 ( 6.5-9.2kW ) Time: 8 secs. Coil: Regular induction heating coil. Custom coil design is possible upon request. The Process: We successfully carried out two induction brazing tests with several copper assemblies.  First, Cu-P-Ag alloy rings were placed around the thinner of the copper tubings. No additional flux was needed.  The pipes were then carefully aligned. The process of induction brazing was initiated. Once the induction brazing was complete, the two samples were submerged in cold water in order to be cooled instantly. The excessive amount of flux can be furtherly cleaned.

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.