2023年2月1日星期三

induction preheating copper rod

high frequency induction preheating copper rod and connector for an epoxy curing application

induction preheating copper rod and connector for an epoxy curing application Objective: To preheat a portion of the copper rod and a rectangular connector to temperature prior to epoxy curing during a manufacturing process for electrical turnbuckles Material : Customer supplied plated copper rod (12” x 2” x 1”/305mm x 51mm x 102 mm) and connector Temperature :302 ºF (150 ºC) Frequency :25 kHz Induction Heating Equipment: -DW-HF-60kW 15-45 kHz induction heating system equipped with a remote workhead containing four 21 μF capacitors high frequency induction heating equipment - A single position seven-turn helical induction heating coil designed and developed specifically for this application Induction Heating Process The copper rod and connector were placed inside the induction heating coil and the power was turned on. The part heated to temperature within 55 seconds. After being heated to temperature, the part was moved and an epoxy curing/molding process took place. The client was using a large oven to preheat these rods, which was cost inefficient. Induction offers a faster and more costefficient heating method. Results/Benefits - Speed: Induction heated the part to temperature quickly - Efficiency: Induction is a far more efficient method of heating these parts to temperature when compared to their large oven - Precision: Induction made it possible to heat only the parts of the rod that required heating

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.