2022年10月8日星期六

Induction Brazing Carbide Tipping of Medical Tools

High Frequency Induction Brazing Carbide Tipping of Medical Tools Applications

Carbide Tipping is specific induction brazing process by which a hardened tip material is applied to a base material to produce an extremely hard cutting edge. Objective: The objective of this application: Induction brazing carbide tipping of medical tools They would like to use induction heating technology to replace torches and achieve a cleaner brazing process. Induction Brazing Equipment: DW-HF-15 induction brazing equipment was set at 40% to complete the process. The adaptive digital phase control provides efficient operation in a wide frequency range.   Induction Brazing Process: A stainless-steel pin cutter 6 13/16” (17 cm) long with a 0.775” (1.96 cm) wide area for heating had to be brazed with two carbide inserts 25/32”(1.98 cm) long, 1/8” (7.8 mm) wide, 3/32” (2.54 cm) deep. There was an overlap 9/16” (1.42 cm) long, 1/8” (25.4 mm) wide (on each side of cutting head) and 1/16” (1.58 mm) deep. Brazing flux was applied to the joint area. The carbide inserts were then placed in between the pre-forms. The assembly was closed together and brought into the induction heating coil. Heat was applied for 8 seconds reaching the temperature of ~1400°F (760°C). The parts were successfully brazed together. Industry: Medical & Dental

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.