Billet Heating Furnace with Induction Heating

24h Continous Billet Heating Furnace with induction for the heating of copper/aluminum/iron steel billets before hot forming

Product Description For heating various of bar materials: such as steel & iron, bronze, brass, aluminum alloy, etc. Picture just for reference, color is changable with different power. Functions and special specifications customized by customer's requirements. Features and Advantages: 1.Automatic:Automatic feeding, automatic selection of the work-piece is good or bad, automatic measurement of  temperature, automatic discharge. 2. Integrated design: Save installation time,cost and space. 3. Operation panel embedded displays machine operating states, to facilitate fault diagnosis.

	Features	Detail
1	Heating fast and stable	saving 20%- 30% electric energy than traditional way; High efficiency and low energy consumption
2	Small in size	Easy to install, operate and repair
3	Safe and reliable	No high voltage, very safe to your workers.
4	A cooling circulation system	Able to operate continuously 24 hours
5	complete self-protect function	many types of alarm lamps: over-current, over-voltage, over hot, water shortage etc. These lamps can control and protect machine.
6	Environmental protection	Almost no oxide layer, produced no exhaust, no waste-water
7	IGBT Type	Avoid the interruption of unrelated electric net; Ensure the long-life of the machine.

  Parameter of billet heating furnace:

		DW-MF-200	DW-MF-250	DW-MF-300	DW-MF-400	DW-MF-500	DW-MF-600
Input Voltage		3phases, 380V/410V/440V , 50/60Hz
Max Input Current		320A	400A	480A	640A	800A	960A
Oscillating frequency		0.5KHz^20KHz ( Oscillating frequency will be customized according to the size of heating parts)
Duty Cycle Loading		100%,24h continuously work
Cooling Water Desires		0.1MPa
Dimension	Host	1000X800X1500mm			1500X800X2800mm	850X1700X1900mm
	Extension	extension will be customized according to the material and size of heating parts
Weight		110kg	150kg	160kg	170kg	200kg	220kg
		Depend on the dimension of extension

In the induction billet heating furnace the whole of the billets or slug is heated. Normally for short billets or slugs a hopper or bowl is used to automatically present the billets in line to pinch rollers, chain driven tractor units or in some cases pneumatic pushers. The billets are then driven through the coil one behind the other on water cooled rails or ceramic liners are used through the coil bore which reduce friction and prevent wear. The length of the coil is a function of the required soak time, the cycle time per component and the length of the billet. In high volume large cross section work it is not unusual to have 4 or 5 coils in series to give 5 m (16 ft) of coil or more.