Industry: Induction Soldering Manufacturing
Equipment: DW-UHF-6KW handheld induction soldering heater
Materials for Test 1: Brass cap
Materials for Test 2: Hollow steel
Power: 6 kW
Temperature: 800 oF (426°C)
Time: 3-4 secs.
The parts are used in liquid level control systems.
Process steps for Test 1:
First, pre-formed solder is put under the lip of the workpiece. Then, the cap was added. The power supply – was set to 3 seconds. The soldering process in completed.
Process steps for Test 2:
Again, the pre-form solder is placed around the top lip of the workpiece. The wire to be soldered is added to the workpiece. The power supply’s timer is set to 4 seconds. The process of induction soldering is completed within the set time. The excess solder is cleaned.
https://dw-inductionheater.com/wp-content/uploads/2020/03/soldering-brass-and-steel-parts-1.png?v=1584533624
https://dw-inductionheater.com/induction-soldering-steel-and-brass-process.html
high frequency soldering brass, high frequency soldering steel, induction soldering, induction soldering brass, induction soldering process, soldering, soldering brass, soldering steel, soldering steel and brass
