Magnetic Induction Heating Equipment

Main characteristics of Magnetic Induction Heater:

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Main applications of Magnetic Induction Heater:

Model		DW-HF-120KW
Input power desire		3X380V 50-60HZ
Oscillate power max		120KVA
Oscillate frequency		30K-80KHZ
Input power max		130KVA
Cooling water max		0.3Mpa≥6L/MIN
Oscillating current		30-200A
Duty cycle		100% 30°C
Weight		135KG
Cubage	Host computer	650X350X560mm
	Extension	700X350X460mm
Cable length		2M

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/HF-90.jpg
https://dw-inductionheater.com/magnetic-induction-heating-equipment-dw-hf-120kw.html
magentic induction heating, magnetic heating equipment, magnetic heating system, magnetic induction equipment, magnetic induction heater, magnetic induction heating equipment, magnetic induction heating system

RF Induction Heating Equipment

Main characteristics of RF induction heating equipment:

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Main applications of RF induction heater:

Model		DW-HF-90KW
Input power desire		3X380V 50-60HZ
Oscillate power max		90KVA
Oscillate frequency		30K-80KHz
Input power max		99KVA
Cooling water max		0.3Mpa≥6L/MIN
Oscillating current		30-160A
Duty cycle		100%,30 °C
Weight		110KG
Cubage	Host computer	650X350X455mm
	Extension	700X350X450mm
Cable length		2M

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/20100103185602506.jpg
https://dw-inductionheater.com/rf-induction-heating-equipment-dw-hf-90kw.html
radio frequency heating, radio frequency heating system, Radio frequency induction heating, RF brazing equipment, RF heating equipment, RF induction heater, RF induction heating

Induction Brazing&Soldering Machine

Main characteristics:

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Model		DW-HF-45KW
Input power desire		3X380V 50-60HZ
Oscillate power max		45KVA
Oscillate frequency		30K-80KHz
Input power max		50KVA
Cooling water max		0.3Mpa≥6L/MIN
Oscillating current		15-90A
Duty cycle		100%30 °C
Weight		75KG
Cubage	Main	550X240X535mm
	Extension	470X265X440mm
Cable length		2M

Main applications:

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/45kw-induction-heater.jpg
https://dw-inductionheater.com/induction-brazing-soldering-machine-dw-hf-45kw.html
High frequency brazing heater, induction brazing heater, Induction Brazing Machine, induction brazing system, induction soldering equipment, induction soldering heater, induction soldering machine, induction soldering unit

Electrimagnetic Induction Heating Equipment

Main characteristics of electrimagnetic induction heating equipment:

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Main applications of electrimagnetic induction heating:

Model		DW-HF-60KW
Input power desire		3phases,50-60Hz
Oscillate power max		60KVA
Oscillate frequency		30K-80KHZ
Input power max		66KVA
Cooling water max		0.3Mpa≥6L/MIN
Oscillating current		20-120A
Duty cycle		100%,30 °C
Weight		90KG
Cubage	Main	650X285X610mm
	Extension	510X285X430mm
Cable length		2M

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/HF-60.jpg
https://dw-inductionheater.com/electrimagnetic-induction-heating-equipment-dw-hf-60kw.html
Electrimagnetic brazing heater, Electrimagnetic heating, Electrimagnetic heating equipment, Electrimagnetic heating machine, Electrimagnetic heating system, Electrimagnetic heating unit, Electrimagnetic induction heater, Electrimagnetic Induction Heating, Electrimagnetic melting furnace

Induction Brazing Copper Equipment

Main characteristics:

 

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Model		DW-HF-35KW
Input power desire		3X380V 50-60HZ
Oscillate power max		35KVA
Oscillate frequency		30-80KHz
Input power max		35KVA
Cooling water max		0.3Mpa≥6L/MIN
Oscillating current		10-70A
Duty cycle		100%,30 °C
Weight		70KG
Cubage	Host computer	550X240X485mm
	Extension	470X265X440mm
Cable length>		2m

 

Main applications:

 

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/HF-351.jpg
https://dw-inductionheater.com/induction-brazing-copper-equipment-dw-hf-35kw.html
brazing copper machine, brazing induction machine, copper brazing system, induction brazing, induction brazing copper equipment, induction brazing copper machine, induction brazing system

High Frequency Induction Heating Equipment

Main characteristics:

 

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Model		DW-HF-25KW-B(A)
Input power desire		3*380 380V 50-60HZ
Oscillate power max		25KVA
Duty cycle		100%30°C
Cubage	Host computer	550x240x485mm
	Extension	340x205x340mm
Weight		55kg
Cable length		2m
Oscillate frequency		30-80KHz

Main application:

 

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/HF-25.jpg
https://dw-inductionheater.com/high-frequency-induction-heating-equipment-dw-hf-25kw.html
HF, HF heating equipment, HF heating induction, HF heating system, HF heating unit, HF induction heater, HF induction heating, High frequency heating

Semi-Automatic Induction Foging Rod Furnace

Induction Forging Rod Furnace With Semi-Automatic Feeder

Main parts:

• M.F Induction Heating Generator (power supply).


• Compensation Capacitor unit.


• Heating coil and accessories


• Pneumatic rod feeder (Handling system)


• Stand or working table.

Model	DW-MF-45KW	DW-MF-70KW	DW-MF-90KW	DW-MF-110KW	DW-MF-160KW
Applications	Rod about φ15-30mm	Rod about φ15-50mm		Rod about φ15-80mm	Rod about φ15-80mm
Input power max	45KW	70KW	90KW	110KW	160KW
Output power max	45KVA	70KVA	90KVA	110KVA	160KVA
Input Voltage desire	3phases, 380V±10% 50 or 60HZ
Oscillate frequency	1KHz-20KHz,according to the application ,normal about  4KHZ、8KHZ、11KHZ、15KHZ、20KHZ
Duty cycle	100%,24hours work

Main characteristics:

• Suitable for rod heating of steel,cooper,bronze and aluminum.


• Portable and light weight, easily installed beside any pressing equipment.


• Installation and operation can be very easily to use.


• The rod can be rapidly heated to forging temperature to reduce the oxidation of the rod furnace and to raise  the quality of the parts.


• With a very large range of frequency adaptable the rod larger than 15mm can be heated.more rapidly and  more evenly.


• Designed to work continuously everyday.


• Pneumatic rod feeding.


• High efficiency,saving energy and cost.


• Easy to change heating coil to heat rods of different size.


• No preheating required just start the machine and can heat the components to a temperature of 1350 Degree Centigrade.


• Full auto feeder system for rod bars.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2018/10/Forging-Furnace.jpg
https://dw-inductionheater.com/semi-automatic-induction-foging-rod-furnace.html
forging billet furnace, forging billets induction furnace, forging furnace, forging rod furnace, forging rod furnace induction, forging rod induction furnace, induction forging furnace, induction forging rod furnace, semi automatic forging furnace

High Frequency Induction Heater DW-HF-15

Main characteristics:

• IGBT module and inverting technologies, better performance ,higher reliability an lower maintenance cost;


• 100% duty cycle, continuous working is allowed at maximum power output;


• constant current or constant power status can be selected accordingly to achieve higher heating efficiency;


• display of heating power and heating current and oscillating frequency;


• multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.


• simple to install, installation can be done by unprofessional person very easily, connection water and power can be finished in a few minutes.


• light weight, small size.


• different shape and size of induction coil can be changed easily to heat different parts.


• advantages of the model with timer: the power and the operating time of the heating period and retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.


• the separated models are designed to fit the dirty surroundings, the generator can be put in a clean space to increase the reliability; with the small size and light weight of the separated transformer, it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

Model	DW-HF-15kw induction heater
Work power	single phase 220V/50-60Hz
Working voltage(AC)	180V-250V
Max. output power	15 KW ( power can be adjusted 3-15KW)
Oscillation frequency	10-80 KHz
Max. output current	42A
Efficiency	90%
Continuous load rate	100%
Cooling water flow	5L/min(0.1mpa)
Cooling water pressure	>0.2Mpa
Size Length*width*height	500*240*450mm
Water temperature protection	< 40°C
Packing Size	610*620*340mm , 0.13CBM
Gross weight	40kgs
Packages	one wooden case (plywood)
Transport method	by air ,by DHL or by sea

Main applications:

• heat treatment of gear and shaft


• brazing of diamond tools


• brazing of electrical kettle bottom


• tube heating for coating


• heating of stainless steel vessel for annealing


• brazing of machining tools


• melting of all kinds of metals


• brazing of copper & brass tube and connectors in air conditioner manufacturing factories and so on.


• heating of rods for forging


• quenching of parts. Etc.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/1.jpg
https://dw-inductionheater.com/high-frequency-induction-heater-dw-hf-15.html
HF heater, HF Heating furnace, HF heating machine, HF induction heating, high frequency heater, High frequency heating machine, high frequency induction heater

Semi-Automatic Induction Foging Rod Furnace

Induction Forging Rod Furnace With Semi-Automatic Feeder

Main parts:

• M.F Induction Heating Generator (power supply).


• Compensation Capacitor unit.


• Heating coil and accessories


• Pneumatic rod feeder (Handling system)


• Stand or working table.

Model	DW-MF-45KW	DW-MF-70KW	DW-MF-90KW	DW-MF-110KW	DW-MF-160KW
Applications	Rod about φ15-30mm	Rod about φ15-50mm		Rod about φ15-80mm	Rod about φ15-80mm
Input power max	45KW	70KW	90KW	110KW	160KW
Output power max	45KVA	70KVA	90KVA	110KVA	160KVA
Input Voltage desire	3phases, 380V±10% 50 or 60HZ
Oscillate frequency	1KHz-20KHz,according to the application ,normal about  4KHZ、8KHZ、11KHZ、15KHZ、20KHZ
Duty cycle	100%,24hours work

Main characteristics:

• Suitable for rod heating of steel,cooper,bronze and aluminum.


• Portable and light weight, easily installed beside any pressing equipment.


• Installation and operation can be very easily to use.


• The rod can be rapidly heated to forging temperature to reduce the oxidation of the rod furnace and to raise  the quality of the parts.


• With a very large range of frequency adaptable the rod larger than 15mm can be heated.more rapidly and  more evenly.


• Designed to work continuously everyday.


• Pneumatic rod feeding.


• High efficiency,saving energy and cost.


• Easy to change heating coil to heat rods of different size.


• No preheating required just start the machine and can heat the components to a temperature of 1350 Degree Centigrade.


• Full auto feeder system for rod bars.

 

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2018/10/Forging-Furnace.jpg
https://dw-inductionheater.com/semi-automatic-induction-foging-rod-furnace.html
forging billet furnace, forging billets induction furnace, forging furnace, forging rod furnace, forging rod furnace induction, forging rod induction furnace, induction forging furnace, induction forging rod furnace, semi automatic forging furnace

Full Automatic Induction Forging Rod Furnace

Induction Forging Rod Bar Furnace With Full Automatic Feeder System

Main parts:

• M.F Induction Heating Generator (power supply).


• Compensation Capacitor unit.


• Heating coil and accessories


• Full-auto Feeder System


• Stand or working table.

Model	DW-MF-45KW	DW-MF-70KW	DW-MF-90KW	DW-MF-110KW	DW-MF-160KW
Applications	Rod about φ15-30mm	Rod about φ15-50mm		Rod about φ15-80mm	Rod about φ15-80mm
Input power max	45KW	70KW	90KW	110KW	160KW
Output power max	45KVA	70KVA	90KVA	110KVA	160KVA
Input Voltage desire	3phases, 380V±10% 50 or 60HZ
Oscillate frequency	1KHz-20KHz,according to the application ,normal about  4KHZ、8KHZ、11KHZ、15KHZ、20KHZ
Duty cycle	100%,24hours work

Main characteristics:

 

• Suitable for rod heating of steel,cooper,bronze and aluminum.


• Portable and light weight, easily installed beside any pressing equipment.


• Installation and operation can be very easily to use.


• The rod can be rapidly heated to forging temperature to reduce the oxidation of the rod furnace and to raise  the quality of the parts.


• With a very large range of frequency adaptable the rod larger than 15mm can be heated.more rapidly and  more evenly.


• Designed to work continuously everyday.


• Pneumatic rod feeding.


• High efficiency,saving energy and cost.


• Easy to change heating coil to heat rods of different size.


• No preheating required just start the machine and can heat the components to a temperature of 1350 Degree Centigrade.


• Full auto feeder system for rod bars.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/full-automatic-feeder-system.jpg
https://dw-inductionheater.com/full-automatic-induction-forging-rod-furnace.html
forging bars furnace, forging billets furnace, forging rod furnace, forging rod heater, induction billets heater, induction forge billets, induction forging, induction forging machine, induction forging rod, induction forging system

Induction Hardening Machine

Main parts:

• Induction Heating Generator.(power supply)


• Compensation capacitor unit.


• Power transformer.


• spray liquid System


• Machine Tool

induction hardening treatment

Series	Model		Input power Max	Input current Max	Oscillate frequency	Input Voltage	Duty cycle
M . F .	DW-MF-15 Induction Generator		15KW	23A	1KHz-20KHz According to the application	3phases 380V±10%	100%
	DW-MF-25 Induction Generator		25KW	36A
	DW-MF-35Induction Generator		35KW	51A
	DW-MF-45 Induction Generator		45KW	68A
	DW-MF-70 Induction Generator		70KW	105A
	DW-MF-90 Induction Generator		90KW	135A
	DW-MF-110 Induction Generator		110KW	170A
	DW-MF-160 Induction Generator		160KW	240A
	DW-MF-300 Induction Generator		300KW	400A
	DW-MF-45 Induction Heating Rod Forging Furnace		45KW	68A	1KHz-20KHz	3phases 380V±10%	100%
	DW-MF-70 Induction Heating Rod Forging Furnace		70KW	105A
	DW-MF-90 Induction Heating Rod Forging Furnace		90KW	135A
	DW-MF-110 Induction Heating Rod Forging Furnace		110KW	170A
	DW-MF-160 Induction Heating Rod Forging Furnace		160KW	240A
	DW-MF-15   Induction Melting Furnace		15KW	23A	1K-20KHz	3phases 380V±10%	100%
	DW-MF-25   Induction Melting Furnace		25KW	36A
	DW-MF-35   Induction Melting Furnace		35KW	51A
	DW-MF-45   Induction Melting Furnace		45KW	68A
	DW-MF-70   Induction Melting Furnace		70KW	105A
	DW-MF-90   Induction Melting Furnace		90KW	135A
	DW-MF-110 Induction Melting Furnace		110KW	170A
	DW-MF-160 Induction Melting Furnace		160KW	240A
	DW-MF-110 Induction Hardening Equipment		110KW	170A	1K-8KHz	3phases 380V±10%	100%
	DW-MF-160Induction Hardening Equipment		160KW	240A
H . F .	DW-HF-15 Series	DW-HF-15KW	15KVA	32A	30-100KHz	Single phase 220V	80%
	DW-HF-25 Series	DW-HF-25KW-A	25KVA	23A	20K-80KHz	3phases 380V±10%	100%
		DW-HF-25KW-B
	DW-HF-35 Series	DW-HF-35KW-B	35KVA	51A
	DW-HF-45 Series	DW-HF-45KW-B	45KVA	68A
	DW-HF-60 Series	DW-HF-60KW-B	60KVA	105A
	DW-HF-80 Series	DW-HF-80KW-B	80KVA	130A
	DW-HF-90 Series	DW-HF-90KW-B	90KVA	160A
	DW-HF-120 Series	DW-HF-120KW-B	120KVA	200A
	DW-HF-160 Series	DW-HF-160KW-B	160KVA	260A
U . H . F .	DW-UHF-4.5KW		4.5KW	20A	1.1-2.0MHz	Single phase220V ±10%	100%
	DW-UHF-6.0KW		6.0KW	28A
	DW-UHF-10KW		10KW	15A	100-500KHz	3phases 380V±10%	100%
	DW-UHF-20KW		20KW	30A	50-250KHz
	DW-UHF-30KW		30KW	45A	50-200KHz
	DW-UHF-40KW		40KW	60A	50-200KHz
	DW-UHF-60KW		60KW	90A	50-150KHz

Application:

• Hardening for various hardware and tools, such as plier,wrench, hammer, ax, screwing tools and shear(orchard shear).


• Hardening for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.


• Hardening for various electric tools, such as gear and axes.


• Hardening for machine tools, such as lathe deck and guide rail.


• Hardening for various hardware metal parts and machined parts.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2015/03/induction-hardening-machine1.jpg
https://dw-inductionheater.com/induction-hardening-machine.html
induction hardening, induction hardening applications, induction hardening equipment, induction hardening machine, induction hardening process, induction hardening surface, induction hardening system, surface induction hardening

Induction Brazing Coils

Induction Brazing Coils

No matter what shape, size, or style induction coil you need, we can help you! Here are just a few of the hundreds of coil designs we have worked with. Pancake coils, helical coils, concentrator coils…square, round and rectangular tubing…Single-turn, five-turn, twelve-turn…under 0.10″ ID to over 5′ ID…for internal or external heating. Whatever your requirements, send us your drawings and specifications for a prompt quotation. If you’re new to induction heating, send us your parts for a free evaluation.

It is the induction coil complimented by the correct tooling that very often dictates the success or failure of the entire system.

Induction Heating Coil Design

Fabricated from highly conductive copper tubing or plate, the induction coil’s design is influenced by the application, the selection of frequency, power density and heat time. The purpose of the induction coil is to create a magnetic flux pattern to generate a current path in the work piece to selectively heat the area of the assembly to be brazed.

The Induction coil must be correctly positioned on the assembly allowing the required heating to be accomplished. The air gap or coupling space between the work piece and the inside of the coil should be minimized for reasons of efficiency. Typical design gaps of 0.125 inch (3.175 mm) to 0.250 inch (6.350 mm) are reasonable for brazing with a helical coil.

Irregularly shaped sections may need additional clearances which require additional power to overcome these poor coupling efficiencies. These cases include situations where a round coil with a large air gap or a non-encircling coil is needed to access the braze area.

The area to be heated determines the length of the induction coil. An induction coil that is too short will require a longer heating time to allow the heat, by conduction, to cover the area. An induction heating coil that is too wide will heat more metal than necessary, and therefore be less efficient. DaWei Induction Heating Machine Co has many special designs of inductors for localized heating, and coils that heat efficiently without surrounding the work piece.

Induction Heating Coil Design and Basic Design

induction heating coils design

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2016/07/pancake-coil.jpg
https://dw-inductionheater.com/product/induction-brazing-coils-2
induction brazing coil, induction coil, induction coil designs, induction coils, induction heating coil design, induction melting coil, inductor

Water Chiller

Water Chiller/Air Cooled Industrial Chiller

Model: AC-Series

Model		AC-12	AC-15	AC-20(D)	AC-25(D)	AC-30(D)	AC-40(D)
nominal cooling capacity	Kcal/h	25585	35948	47558	51170	71896	94256
	Btu/h	101507	142621	188684	203014	285243	373955
	KW	29.75	41.8	55.3	59.5	83.6	109.6
	US.RT/h	8.5	11.94	15.8	17	23.88	31.31
input power	KW	11.82	16.42	20.41	23.45	32.75	40.35
power supply		3PH~380V 50HZ
refrigerant	type	R22
	type of control	thermostatic expansion valve
compressor	type	hermetic scroll
	power (KW)	9.82	13.72	8.3×2	9.82×2	13.72×2	17.1×2
condenser	type	finned copper tube + low noise outer rotor fan
	Cooling air flow (m3/h)	12000	15000	20000	25000	30000	40000
evaporator	type	water tank with coil
	chilled fluid flow (m3/h)	5.12	7.2	9.52	10.25	14.39	18.87
	tank volume (L)	200	270	350	350	420	580
	inlet and outlet pipe diameter	2″	2″	2″	2-1/2″	2-1/2″	3″
water pump	power (KW)	1.5	1.5	2.25	2.25	3.75	3.75
	lift (m)	20	20	20	20	22	22
safety protection		compressor over temperature, over current, high and low pressure, over temperature,phase sequence, phase-missing, exhaust overheating
dimension	length (mm)	1530	1850	2000	2000	2000	2000
	width (mm)	780	990	1130	1130	1480	1560
	height (mm)	1430	1680	1720	1924	1800	1800
weight	Kg	530	750	835	920	1150	1350

Note:

1. Nominal cooling capacity is according to:

Inlet chilled fluid temperature: 12℃

Outlet chilled fluid temperature: 7℃

Inlet cooling air temperature: 30℃

Outlet cooling air temperature: 35℃

2. Working range:

The temperature range of chilled fluid is from 5℃ to 35℃;

Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.

It is better to use the chiller while the ambient temperature at or below 35℃.

We reserve the right to modify the above dimensions or parameters without further notice.

Features:

High efficiency

Accurate temperature control ±1°C

Hitachi scroll type compressor

Error alarm for fault indication and Error code showed for checking the problem easily

Campact and elegant european design with Intelligent Digital Contral, easy for operation

Easy to install and maintain

One year warranty
Application

X-ray diffraction spectrometer

Wire cut / Spark erosion EDM （EDM=- Electron Discharge Machining）

Medical equipment

Machine tool

Induction hardening machine

High frequency welding machine

Hydraulic press

Pressure die casting

Furnaces

Power generators

Condenser cooling for low temperature test chambers

Injection moulding machine

Plasma spray / Coating machine

After coolers for compressed air drier

Chemical process plants

Dies & pigment manufacturing

Pharmaceutical industry

Electroplating plants

Anodizing plants

Food & beverage industry

 

 

 

 

 

 

 

 

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2016/07/water-chiller.jpg
https://dw-inductionheater.com/water-chiller.html
closed industrial chiller, closed water chiller, inductry chiller, industrial chiller, water chiller, water cooled chiller

Magnetic Grinding Machine

Magnetic Grinding Machine (magnetic deburring & polishing machine) Principle

Magnetic grinding machines  (magnetic deburring & polishing machine) use the magical force of magnetic field to make the stainless steel pins rotate very fast, and the pins de-burr, polish and clean the work pieces high-effectively and precisely. This machine does not make any harm to the environment when it is working.

Magnetic Grinding Machine (magnetic deburring & polishing machine) Specifications

The magnetic Grinding Machine(magnetic deburring & polishing machine) is SUPER large grinding trough designed, suitable for massgrinding, polishing or cleaning. The magnetic grinding machine is running automatically, one person can operate multiple machines.

Magnetic grinding machines(magnetic deburring & polishing machine) use the magical force of magnetic field to make the stainless steel pins rotate very fast, to de-burr, polish and clean the work pieces high-effectively and precisely.

The magnetic grinding machines(magnetic deburring & polishing machine) are environmental friendly, NO pollution. They are grindingand polishing fast, effectively. They have an excellent ability of fast de-burring, high efficiently grinding small inner holes, inner pipes, crevices, etc. Make NO damage to the surface of workpieces, and DO NOT affect the accuracy of workpieces.

Magnetic grinding machines are of simple, safe and convenient operation, low cost and long working life.

Our products of grinding machines are suitable for grinding, de-burring, chamfering and polishing all kinds of metal stamping parts, metal castings, rigid plastic, etc. And the grinding machines are applied into the industries of horologe, eyeglass, lock manufacturing, ornaments & jewellery, electron, artware, machinery and hardware, etc.

Application: 

Jewelry,handcrafts,collection, automatic lathe are parts, die-casting, punching machine parts, spring and shrapnel spare parts,electronic,telecommucation,medical spare parts.

Features:

1.Suitable for light iron metal,non-iron metal and tough plactic precious parts.

2.Realizing multi-effec such as burr wlimination, back angle,polishing and cleaning, and so on

3.Polishing dead angle of irregular parts,tubular,

4.blending timing, high speed,easy and safe operation

5.Adjustable can meet all polishing  demands

6.No dead angle while polishing

7.Finish reminding,it can reminding when the polishing done,one can control  several  ones

8.Volage,current, frequency and time are controllable easily

9.Polishing  processure needs no manwork intervene

Function

Magnetic Grinding Machine (magnetic deburring & polishing machine) removes the rusted layer or burnt spots of the parts, deburr and finish the parts in a very short time. The machine is especially best workable for the parts with inner holes, complex shapes, crevices or screw threads. Magnetic polishing machine will not hurt the surface of the parts, and not change the accuracy of the parts after finishing. The machine works efficiently and only about 5~20 minutes is needed for the parts. Magnetic Grinding Machine (magnetic deburring & polishing machine) can finish parts of metal materials and hard plastics.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2016/07/Magnetic-grinding-machine.gif
https://dw-inductionheater.com/magnetic-grinding-machine.html
deburring polishing machine, magnetic deburring machine, magnetic grinding equipment, magnetic grinding machine, magnetic grinding system, magnetic polishing machine

Magnetic deburring & polishing machine

Magnetic deburring & polishing machine Principle

Magnetic grinding machines  (magnetic deburring & polishing machine) use the magical force of magnetic field to make the stainless steel pins rotate very fast, and the pins de-burr, polish and clean the work pieces high-effectively and precisely. This machine does not make any harm to the environment when it is working.

Magnetic Grinding Machine (magnetic deburring & polishing machine) Specifications

The magnetic Grinding Machine(magnetic deburring & polishing machine) is SUPER large grinding trough designed, suitable for massgrinding, polishing or cleaning. The magnetic grinding machine is running automatically, one person can operate multiple machines.

Magnetic grinding machines(magnetic deburring & polishing machine) use the magical force of magnetic field to make the stainless steel pins rotate very fast, to de-burr, polish and clean the work pieces high-effectively and precisely.

The magnetic grinding machines(magnetic deburring & polishing machine) are environmental friendly, NO pollution. They are grindingand polishing fast, effectively. They have an excellent ability of fast de-burring, high efficiently grinding small inner holes, inner pipes, crevices, etc. Make NO damage to the surface of workpieces, and DO NOT affect the accuracy of workpieces.

Magnetic grinding machines are of simple, safe and convenient operation, low cost and long working life.

Our products of grinding machines are suitable for grinding, de-burring, chamfering and polishing all kinds of metal stamping parts, metal castings, rigid plastic, etc. And the grinding machines are applied into the industries of horologe, eyeglass, lock manufacturing, ornaments & jewellery, electron, artware, machinery and hardware, etc.

Application: 

Jewelry,handcrafts,collection, automatic lathe are parts, die-casting, punching machine parts, spring and shrapnel spare parts,electronic,telecommucation,medical spare parts.

Features:

1.Suitable for light iron metal,non-iron metal and tough plactic precious parts.

2.Realizing multi-effec such as burr wlimination, back angle,polishing and cleaning, and so on

3.Polishing dead angle of irregular parts,tubular,

4.blending timing, high speed,easy and safe operation

5.Adjustable can meet all polishing  demands

6.No dead angle while polishing

7.Finish reminding,it can reminding when the polishing done,one can control  several  ones

8.Volage,current, frequency and time are controllable easily

9.Polishing  processure needs no manwork intervene

Function

Magnetic Grinding Machine (magnetic deburring & polishing machine) removes the rusted layer or burnt spots of the parts, deburr and finish the parts in a very short time. The machine is especially best workable for the parts with inner holes, complex shapes, crevices or screw threads. Magnetic polishing machine will not hurt the surface of the parts, and not change the accuracy of the parts after finishing. The machine works efficiently and only about 5~20 minutes is needed for the parts. Magnetic Grinding Machine (magnetic deburring & polishing machine) can finish parts of metal materials and hard plastics.

Name

Email (*)

Message (*)

https://dw-inductionheater.com/wp-content/uploads/2016/07/Magnetic-grinding-machine.jpg
https://dw-inductionheater.com/magnetic-deburring-polishing-machine.html
deburring polishing machine, magnetic deburring machine, magnetic deburring polishing, magnetic grinding equipment, magnetic grinding machine, magnetic polishing machine