2024年7月1日星期一
Brazing Cutting Tool with Induction
Brazing Cutting Tools with Induction
Objective: To braze cone and shaft for a cutting tool
Material Customer supplied parts
Temperature indicating paint Braze preforms
Temperature 1300 - 1400 ºF (704 – 760 °C)
Frequency 400 kHz
Equipment: DW-UHF-6kw-I, 250-600 kHz induction heating system, including remote heat station using two 0.66 μF capacitors (total 1.32 μF) A two-position, two-turn induction heating coil designed and developed specifically for this application.
Process: Two sets of parts are placed in the individual coils. Braze preforms are placed on the cone at the joint. The assembled part is placed inside the induction heating coil and heated until the braze melts.
Results/Benefits: efficient coil design enables simultaneous heating of two parts on the single 2kW system. dual braze is accomplished within required process time, increasing process throughput
https://dw-inductionheater.com/brazing-cutting-tools-with-induction.html?feed_id=252290&_unique_id=6683702135bed
关注者
博客归档
-
▼
2024
(426)
-
▼
七月
(12)
- Induction Heating Fluidized Bed Reactors
- Induction Brazing Steel Tube
- Induction Heating Fluidized Bed Reactors
- Brazing Copper Tube with Induction
- Brazing Eyeglass Frames With Induction
- Brazing Copper Tube to Brass Fitting With Induction
- Brazing Copper Assemblies With Induction
- Brazing Thin Copper Tube With Induction
- Brazing Brass Fittings With Induction
- Brazing carbide shaft with induction
- Brazing Cutting Tool with Induction
- What is Induction Brazing?
-
▼
七月
(12)
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.