2022年11月26日星期六

Soldering Steel To Brass With Induction Heater

Soldering Steel To Brass With Induction IGBT Soldering Heater Objective Heat an assembly of small, gold-plated steel connectors to a brass block. Material Approx. 1/8” (3.2mm) diameter gold-plated steel connectors, 1”(25.4mm) square x 1/4” thick brass block Temperature 600°F(315.6ºC) Frequency 240 kHz Equipment • DW-UHF-6kW induction heating system equipped with a remote workhead. • An induction heating coil designed and developed specifically for this application. Process A two-turn helical coil is used to provide uniform heat to parts assembly. Solder paste and flux are applied to the joint area and power is applied for 20 seconds to solder the parts. Proper fixturing is needed to hold the parts in position. Results/Benefits Induction heating provides: • Rapid, localized heating to specific regions of part • Neat and clean joints • Flameless processing induction soldering steel to brass

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.