2022年11月15日星期二

RF Soldering Circuit Board

Induction RF Soldering Circuit Board With High Frequency Soldering Heater Objective Heat a circuit board assembly to 600ºF (315.5ºC) to solder RF connectors to a radar manifold. Material Kovar connectors 0.100” (2.54mm) wide x 0.200” (5.08mm) long, circuit board and solder paste Temperature 600ºF (315.5ºC) Frequency 271 kHz Equipment • DW-UHF-2 kW induction heating system, equipped with a remote workhead containing one 1.2μF capacitor. • An induction heating coil designed and developed specifically for this application. Process A two turn helical coil is used to heat the assembly. Solder paste is applied to the joint area, the connectors are placed in the proper location and heat is applied for 10 seconds, creating the solder paste to flow. Results/Benefits Induction heating provides: • Creates liquid and gas-tight joint quickly and efficiently • Precise application of heat without affecting others areas of board • Hands-free heating that involves no operator skill for manufacturing • Even distribution of heating RF Soldering Circuit Board             Induction RF Soldering Circuit Board

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.