2021年11月25日星期四

induction heating graphite carbon

Induction heating graphite carbon with High Frequency induction heating equipment Objective Heating carbon graphite anodes to destructively oxidize the parts to process embedded contaminants Material anodes 2.5 x 2.5 x 4 (63 x 63 x 102) h x w x d in (mm) Temperature 1900 °F 1000°C Frequency 30 kHz Equipment DW-MF-20kW induction heating system, custom multi-turn helical coil, 4 cap 1.0μF workhead Process An air purge system is used to provide fresh air (~25 f3/hr) to the part during the heat cycle and to provide a swirling action for maximum contact with the surface of the anode. The anode is placed inside the induction-heating coil and heated to a temperature of 1000°C. After 2.5 hours, the anode burns to about 0.375 inch diameter piece. A pyrometer/controller is used to provide constant temperature as the anode reduces in size. Results/Benefits Induction heating allows this process to be very efficient and controllable induction heating graphite carbon

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.