显示标签为“preheatinginductionwelding”的博文。显示所有博文
显示标签为“preheatinginductionwelding”的博文。显示所有博文

2021年12月3日星期五

Induction Preheating

What is induction preheating?

Induction preheating is a process where materials or workpieces are heated by induction prior to further processing. The reasons for pre-heating vary. In the cable and wire industry, cable cores are pre-heated before insulation extrusion. Steels strips are pre-heated prior to pickling and zinc coating. Induction preheating also softens metals before bending, and prepares tubes and pipes for welding. Mobile preheating solutions facilitate onsite repairs of bearing assemblies. What are the benefits? DAWEI Induction preheating systems are extremely efficient, resulting in major energy savings. When preheating steel strips and cable and wire, diode rectifiers ensure a constant power factor of 0.95, thus eliminating reactive power costs. Cycle times are short, too. And continuous automatic matching means a single coil can handle wide production ranges. Induction preheating systems are compact and easy to integrate into existing or planned production lines. Where is it used? Induction preheating is employed in the automotive, mechanical, aeronautical, electrotechnical, white goods and shipbuilding industries. A major area of use is preheating for welding. Our MYD series air cooling induction heating systems are used in the offshore sector for onsite weld preheating. MYD series air cooling heating units are also frequently flown to oil platforms and airports to perform repairs and maintenance. What equipment is available? The MYD air cooling induction heating systems are primary used for preheating weld heating treatment process.

2021年12月2日星期四

Induction Preheating Welding Automotive Parts

Induction Preheating Welding Automotive Parts With Induction Heating Equipment Objective To pre-heat the seam of a truck axle to over 300°F within 15 seconds for a welding application and maintain temperature within the welding zone for 15 seconds after the power is turned off. Material Steel truck axle; 350° and 400°F temperature indicating paint;350°, 375°and 400°F temperature indicating “crayons” Temperature 350°F Frequency 75 kHz Equipment DW-HF-35kW power supply, remote heat station with four 1.2 μF capacitors and a specially designed pancake induction coil. Process A fixture was constructed to rotate the axle 400° in 15 seconds and the induction coil was placed above the axle. The circumference of the axle (beneath the coil) was painted with 350° and 400°F temperature indicating paint. While the axle was being rotated, RF power was applied for 15 seconds. All of the paint melted, confirming that the axle temperature was above 400°F. The RF power was shut off and the temperature “crayons” were immediately placed against the axle to monitor temperature. The 400°F crayon did not melt; the 375°F crayon melted for 15 seconds; the 350°F crayon melted for 30 seconds. Results The steel axle was heated to over 400°F within 15 seconds and temperatures above 350°F were maintained for 30 seconds after power was turned off, meeting the requirements of the welding application.

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.