Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts https://dw-inductionheater.com/induction-shrink-fitting-for-inserts.html?feed_id=274795&_unique_id=67eea2857de1d

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz   https://dw-inductionheater.com/induction-shrink-fitting-for-inserts.html?feed_id=244984&_unique_id=663d74491fc0c

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz  

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz   https://dw-inductionheater.com/induction-shrink-fitting-for-inserts.html?feed_id=227441&_unique_id=6506cffbeef18

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater

Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a
period of time to complete the process.
Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2"
Steel insertion parts.
Temperature: 3750F
Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved.
- 3750F was reached in one (1) minute to allow for insertion.
- 20 housings were successfully heated using a five (5) turn right angle pancake coil.
Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube.
Frequency: 80 kHz



 

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz  

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz  

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz  

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz  

Induction Shrink Fitting For Inserts

Induction Shrink Fitting For Inserts with IGBT Shrink fitting Heater Objective: To heat an aluminum fuel pump housing measuring 8" x 4 1/2" x 3 1/2" to 3750F, allowing steel parts to be inserted. Presently the housings are heated for over one hour in a convection oven. The areas that are to have steel parts inserted measure 1.5" and 0.6875" in diameter. In addition, the insertion process lasts for a little over one minute, so 3750F should be maintained for a period of time to complete the process. Material: Aluminum Pump Housing measuring 8" x 4 1/2" x 3 1/2" Steel insertion parts. Temperature: 3750F Application: By using the DW-HF- 25, 25 kW output solid state induction power supply the following results were achieved. - 3750F was reached in one (1) minute to allow for insertion. - 20 housings were successfully heated using a five (5) turn right angle pancake coil. Equipment: Ameritherm SP 25, 25 kW output solid state induction power supply including one (1) remote heat station containing four (4) capacitors totalling 1.0 μF, and  a five (5) turn right angle pancake coil made from 3/16" copper tube. Frequency: 80 kHz