显示标签为“inductionhotformingmachine”的博文。显示所有博文
显示标签为“inductionhotformingmachine”的博文。显示所有博文

2021年12月26日星期日

Induction Heating For Hot Forming Process

Objective Heat part to approximately 1600-1800°F (871-982°C) in under 5 minutes with 10 kW machine. This test will show induction heating will replace torch heating and take less time than current torch process.
Materials • Copper tube • Aluminum form • Compression fittings Key Parameters Power: 5.54 kW cold/ 9.85 kW post curie Temperature: 1600-1800°F (871-982°C) Time: 4 minutes
Process:
  1. Position part into coil and center the part 2. Start power cycle and heat for 4 minutes to reach approximately 1800°F (982°C).
Results/Benefits: Part heated to temperature fairly even across 4 inch heat zone in 4 minutes.  

2021年11月20日星期六

Induction Hot Forming Titanium Rod

Induction Hot Forming Titanium Rod With RF Induction Heating Equipment Objective To heat a titanium rod to 1700°F (926.7°C) within 60 seconds for hot forming. Material Titanium rods, 1.25”(31.8mm) diameter, 5”(127mm) length Temperature 1700°F (926.7°C) Frequency 70 kHz Equipment •DW-HF-60kW induction heating system, equipped with a remote workhead. • An induction heating coil designed and developed specifically for this application. Process A specially designed thirteen-turn helical induction coil is used to heat the titanium rod to 1700ºF (926.7°C). Two optical pyrometers are used to measure the temperature at the surface and center of the part. Both the surface and center of the titanium rod are heated to 1700ºF (926.7°C) within 60 seconds. Results/Benefits Induction heating provides: • Improved production rates with minimal defects • Improved mechanical properties • Even distribution of heating Induction Forging Titanium Rods (2)

关注者

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.