https://dw-inductionheater.com/induction-brazing-aluminum-to-aluminum-tube.html?feed_id=270909&_unique_id=67bf25bc66097
2025年2月26日星期三
Induction Brazing Aluminum to Aluminum Tube
https://dw-inductionheater.com/induction-brazing-aluminum-to-aluminum-tube.html?feed_id=270909&_unique_id=67bf25bc66097
2025年2月19日星期三
Induction Brazing Aluminum Tube T Joints
https://dw-inductionheater.com/induction-brazing-aluminum-tube-t-joints.html?feed_id=270184&_unique_id=67b6400d14373
2025年1月23日星期四
2025年1月19日星期日
Brazing Aluminum Tubing to Aluminum Parts
https://dw-inductionheater.com/brazing-aluminum-tubing-to-aluminum-parts.html?feed_id=267168&_unique_id=678db5c8dcdc1
2024年12月23日星期一
Brazing Aluminum Tubes with Induction Heating
https://dw-inductionheater.com/brazing-aluminum-tubes-with-induction-heating.html?feed_id=264326&_unique_id=67691ff97a09c
2024年6月26日星期三
Brazing Brass to Aluminum with Induction
Brazing Brass to Aluminum with Induction
Objective: Copper 'tees' and 'ells' are to be brazed to the aluminum body of a refrigeration valve
Material customer's valve copper fittings braze
Temperature 2550 ºF (1400°C)
Frequency 360 kHz
Equipment DW-UHF-10KW induction heating system including a workhead containing two 1.5μF capacitors (total 0.75μF) and a three-turn helical coil
Process The valve is placed inside the coil and RF power is applied until the part is heated to the required temperature and the braze is seen to flow into the joint. Two tube sizes were run using the same induction system settings with differing cycle times.
Results/Benefits • energy is applied only to the zone to be heated • heating of the joint/braze is uniform and repeatable
https://dw-inductionheater.com/brazing-brass-to-aluminum-with-induction.html?feed_id=251610&_unique_id=667c4c29db306
2024年6月19日星期三
Induction Brazing Aluminum Automotive
Induction Brazing Aluminum Automotive
Objective: Heat aluminum for an automotive brazing application
Material: Aluminum tubing 0.50 (12.7mm) dia, an aluminum boss 1” (25.4mm) long, flux filled braze rings
Temperature: 1200 ºF (649 ºC)
Frequency: 370 kHz
Equipment • DW-UHF-10KW induction heating system, equipped with a remote workhead containing one 1.0μF capacitors for a total of 1.0 μF
• An induction heating coil designed and developed specifically for this application.
Process A multi turn pancake coil is used to heat the joint between the aluminum tubing and boss. The joint heats to temperature in 1.5 minutes and the braze ring melts forming a clean brazed
joint.
Results/Benefits Induction heating provides:
• Hands-free heating that involves minimal operator skill for manufacturing
• Flameless application
• Reliable, repeatable aesthetically pleasing braze joint
• Even distribution of heating
https://dw-inductionheater.com/induction-brazing-aluminum-automotive.html?feed_id=250536&_unique_id=6673038dc8332
2020年5月17日星期日
Brazing Aluminum Tubing to Aluminum Parts
Objective
The objective of the application test is induction brazing aluminum tubing to aluminum parts in less than 15 seconds. We have aluminum tubing and an aluminum “receiver”. The brazing alloy is an alloy ring, and has a flow temperature of 1030°F (554°C).
Equipment
DW-HF-15kw induction heating machine

Materials
• Aluminum tube: 0.167” (4.242mm) OD, 0.108” (2.743mm) ID
• Aluminum component: ID .1675” (4.255mm), depth .288” (7.315mm),
chamfer at top area is 0.2375” (6.033mm) ID max
• Braze alloy in the form of two-turn alloy ring
• Flux
Key Parameters
Temperature: 1030°F (554°C)
Power: 5 kW
Time: 14 seconds
Process:
- The Aluminum component and tube were assembled together with the alloy ring. Flux was added.
- The part was positioned in the induction coil.
- Several tests were conducted with different cycle times to confirm the heating time for a good braze.
- At 15 seconds the assembly melted.
- At 14 seconds, we had success for brazing aluminum to aluminum, and a good quality braze joint was achieved.
Results/Benefits:
The 5 kW induction heating system requested by the customer, will meet the customer’s time requirements for induction brazing.
- Precise control of the time and temperature
- Power on demand with rapid heat cycles
- Repeatable process, not operator dependent
- Safe induction heating with no open flames
- Energy efficient heating
https://dw-inductionheater.com/wp-content/uploads/2020/05/Induction-Brazing-Aluminum-Tubing-to-Aluminum-Parts-4.png?v=1589719680
https://dw-inductionheater.com/induction-brazing-aluminum-tubing-to-aluminum-parts.html
aluminum brazing, Brazing aluminum, brazing aluminum tubing system, HF brazing aluminum tubing, high frequency brazing aluminum, high frequency brazing aluminum tubing, Induction Brazing Aluminum, induction brazing aluminum tubing, RF brazing aluminum tubing
2020年5月1日星期五
Induction brazing aluminum pipes
Equipment
DW-UHF-6kw-III handheld induction brazing machine
Materials
Аluminum to aluminum tube
Flared at interface 0.25” (6.35mm)
Brazed to steel tube 0.19” OD (4.82mm)
Power: 4 kW




Temperature: 1600°F (871°C)
Time: 5 sec
Results and Conclusions:
Induction heating provides:
- Strong durable joints
- Selective and precise heat zone, resulting in less part distortion and joint stress than welding
- More consistent results and suitability for large volume production, without the need for batch processing
- Safer than flame brazing
https://dw-inductionheater.com/wp-content/uploads/2020/05/induction-brazing-aluminum-tubing.png?v=1588336205
https://dw-inductionheater.com/induction-brazing-aluminum-pipes-process.html
aluminum brazing, aluminum brazing system, aluminum pipes induction brazing, Brazing aluminum, Brazing Aluminum pipe, brazing aluminum tubing, HF brazing aluminum, induction aluminum brazer, Induction Brazing Aluminum, induction brazing aluminum pipe, Induction Brazing Aluminum Pipes, induction brazing aluminum system, induction brazing aluminum tube, RF brazing aluminum
关注者
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.










