Brazing Carbide To Steel Shank

Brazing Carbide To Steel Shank with Induction Objective :Brazing carbide teeth to a steel jaw in less than 5 minutes Material: Steel pipe jaw, 0.5” (12.7mm) dia, 1.25” (31.75mm) long, 0.25”(6.35mm) thick carbide teeth, black flux and silver copper braze shims Temperature: 1292ºF (700ºC) Frequency: 300kHz Equipment • DW-UHF-10kW induction heating system, equipped with a remote workhead containing one 0.66μF capacitor • An induction heating coil designed and developed specifically for this application. Process: A two turn rectangular helical coil is used to heat the carbide and steel to 1292ºF (700ºC) for 4 to 5 minutes. Three braze shims control the amount of braze and the even heat allows for a good flow of braze creating an aesthetically pleasing bond. Results/Benefits Induction heating provides: • Hands-free heating that involves no operator skill for manufacturing • Consistent, repeatable aesthetically pleasing brazes • Even distribution of heating https://dw-inductionheater.com/brazing-carbide-to-steel-shank.html?feed_id=229806&_unique_id=653dcd6ce2c3a