2022年10月5日星期三

Induction Soldering Steel Cover

Induction Soldering Steel Cover With High Frequency Heating Units Objective Soldering a nickel plated steel cover onto a nickel plated steel EMI filter housing without damaging the RF circuit Material 2” x 2” (50.8mm) nickel plated steel cover, 2” x 2” (50.8mm) nickel plated steel box and lead-free solder and flux Temperature 573 ºF (300 ºC) Frequency 229 kHz Equipment • DW-UHF-3 kW induction heating system, equipped with a remote workhead containing two 1.2μF capacitors for a total of 2.4μF • An induction heating coil designed and developed specifically for this application. Process A single turn square helical coil is used to solder the cover to the filter box. Solder flux is applied to the filter box and two solder turns (preforms) are placed covering the perimeter of the cover. The assembly is positioned under the coil and power is applied for 7 seconds to solder the seam. Results/Benefits Induction heating provides: • Hands-free heating that involves no operator skill for manufacturing • Repeatable, non-contact clean heating • Fast precise heating • Good solder flow without over heating the box and damaging RF circuits. • Even distribution of heating induction soldering steel cover

关注者

博客归档

我的简介

我的照片
HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.