Induction Annealing Aluminum

Induction Annealing Aluminum https://dw-inductionheater.com/induction-annealing-aluminum.html?feed_id=278740&_unique_id=682b086c181db

Induction Annealing Aluminum PIpe

Induction Annealing Aluminum PIpe https://dw-inductionheater.com/induction-annealing-aluminum-pipe.html?feed_id=278628&_unique_id=6828dcc3d57fb

Induction Annealing Aluminum

Induction Annealing Aluminum With High Frequency Heating System Objective Annealing a 1” lip on aluminum cryogenic dewar that has been work hardened during the process of spin forming. Material Aluminum dewar, lip has a 3.24” (82.3mm) ID and is 0.05” (1.3mm) thick Temperature 800 ºF (427 ºC) Frequency 300 kHz Equipment •DW-UHF-10KW induction heating system, equipped with a remote workhead containing one 1.0 μF capacitor. • An induction heating coil designed and developed specifically for this application. Process A two turn helical coil is used to heat the lip on the cryogenic dewar. The dewar is placed in the coil and power is applied for 2 minutes to anneal the required 1” heat zone. Results/Benefits Induction heating provides: • Hands-free heating that involves no operator skill for manufacturing • Fast, controllable, accurate heating • High efficiency, low energy cost • Even distribution of heating   https://dw-inductionheater.com/induction-annealing-aluminum.html?feed_id=249201&_unique_id=666571bfaf42c

Induction Annealing Aluminum PIpe

Induction Annealing Aluminum PIpe With High Frequency Induction Heating Machine Objective Annealing aluminum fuel tank fill neck to 650 ºF (343 ºC) Material Aluminum fill neck 2.5” (63.5mm) diameter, 14” (35.5cm) long Temperature 650 ºF (343 ºC) Frequency 75 kHz Equipment •DW-HF-45kW induction heating system, equipped with a remote workhead containing eight 1.0μF capacitors for a total of 2.0μF • An induction heating coil designed and developed specifically for this application. Process An eight turn helical is used to heat the tube for annealing. To anneal the full length of the tube, the tube is placed in the coil and heated for 30 seconds then rotated and the bottom half is heated for an additional 30. The tube is then bent while hot to prevent cracking. Results/Benefits Induction heating provides: • High efficiency, low energy cost • Fast, controllable and repeatable process • Prevention of cracks • Hands-free heating that involves no operator skill for manufacturing • Even distribution of heating     https://dw-inductionheater.com/induction-annealing-aluminum-pipe.html?feed_id=249065&_unique_id=6664041b8b842