Induction Brazing T Shaped Copper Tubing Assemblies

Induction Brazing T Shaped Copper Tubing Assemblies https://dw-inductionheater.com/induction-brazing-t-shaped-copper-tubing-assemblies.html?feed_id=268183&_unique_id=679b8d6029a4c

Induction Brazing T Shaped Copper Tubing Assemblies

High Frequency Induction Brazing T Shaped Copper Tubing Assemblies

Objective:

Test 1 – Induction brazing T-shaped copper tubing assemblies – 3 joints simultaneously

Test 2 – Induction brazing copper tubing

Industry: HVAC

Materials: Copper tubers  6, 8, 10, 12 mm ( 0¹⁵⁄_64, 0⁵⁄_16, 0²⁵_⁄64, 0¹⁵_⁄32inch. ); thickness: 1 mm ( 0³⁄₆₄ inch.)

Alloy: Cu-P-Ag rings

TIP: The use of alloy rings is highly recommended with a hand-held brazing gun.

Equipment: DW-UHF-20kw induction brazing machine

Power:

Test 1 ( 7-8kW )

Test 2 ( 6.5-9.2kW )

Time: 8 secs.

Coil: Regular induction heating coil. Custom coil design is possible upon request.

The Process:

We successfully carried out two induction brazing tests with several copper assemblies.  First, Cu-P-Ag alloy rings were placed around the thinner of the copper tubings. No additional flux was needed.  The pipes were then carefully aligned. The process of induction brazing was initiated. Once the induction brazing was complete, the two samples were submerged in cold water in order to be cooled instantly. The excessive amount of flux can be furtherly cleaned.

https://dw-inductionheater.com/wp-content/uploads/2020/04/brazing-T-shaped-Copper-tubing-with-induction.jpg?v=1586760450
https://dw-inductionheater.com/induction-brazing-t-shaped-copper-tubing-assemblies.html
brazing t copper, brazing t tubing, induction brazing copper, induction brazing heater, induction brazing machine, induction brazing system, induction brazing T, induction brazing T copper, T copper pipes brazing, UHF brazing, UHF brazing copper tubing