Brazing Copper to Brass Pipe With Induction
Objective: Brazing several brass and copper assemblies used in water faucets Material braze, white flux
Temperature 1350 °F 730°C
Frequency 200 or 280 kHz (coil dependant)
Equipment DW-UHF-10KW induction heating system, remote work head with two 1μF capacitors and a 3-turn helical coil
Process: Three helical coils are used separately to braze a range of provided parts. Parts are assembled with flux and a braze alloy and then heated. The heat time varies from part to part with large parts taking less than 3 minutes and, the smaller parts heated in less than 20 seconds. After heating the parts are quench-cooled.
Results/Benefits
Repeatability: the inherent precision of induction heating supports a process which is highly repeatable.
Economy: the process allows for the use of higher temperature braze alloy than a flame process
https://dw-inductionheater.com/brazing-copper-to-brass-pipe-with-induction.html?feed_id=251311&_unique_id=667a27cda8d25
2024年6月24日星期一
Brazing Copper to Brass Pipe With Induction
Brazing Copper to Brass Pipe With Induction
Objective: Brazing several brass and copper assemblies used in water faucets Material braze, white flux
Temperature 1350 °F 730°C
Frequency 200 or 280 kHz (coil dependant)
Equipment DW-UHF-10KW induction heating system, remote work head with two 1μF capacitors and a 3-turn helical coil
Process: Three helical coils are used separately to braze a range of provided parts. Parts are assembled with flux and a braze alloy and then heated. The heat time varies from part to part with large parts taking less than 3 minutes and, the smaller parts heated in less than 20 seconds. After heating the parts are quench-cooled.
Results/Benefits
Repeatability: the inherent precision of induction heating supports a process which is highly repeatable.
Economy: the process allows for the use of higher temperature braze alloy than a flame process
https://dw-inductionheater.com/brazing-copper-to-brass-pipe-with-induction.html?feed_id=251311&_unique_id=667a27cda8d25
Brazing Brass Pipe With Induction
Brazing Brass Pipe With Induction
Objective: Block is heated to 1400°F to braze trap tube to assembly
Material :brass block and pre-formed tubes braze pre-forms
Temperature: 1400 ºF (760°C)
Frequency: 350 kHz
Equipment DW-UHF-10KW induction heating system including • Coil: custom-designed 2-turn split-helical • Workhead: contains two 1.0μF capacitors (0.5 μF total)
Process The brass parts, braze pre-form and flux are assembled and located within the custom-designed coil. Induction heating of the joint is accomplished in 45 seconds.
Results/Benefits
Economy: induction heats only the material within the coil; no energy is wasted heating the surrounding materials and air; no flame or gasses required for heating Control: process lends itself to the use of braze pre-forms; process easily adapted to automation
Efficiency: energy is expended only during the joint formation
https://dw-inductionheater.com/brazing-brass-pipe-with-induction.html?feed_id=251243&_unique_id=667970acb082e
订阅：
博文 (Atom)
我的简介
- HLQ induction heating machine
- HLQ induction heating machine manufacturer provides the service of induction brazing,melting,hot forming,hardening surface,annealing,shrink fitting,PWHT,etc.