Brazing Carbide Tool Tips With Induction

Brazing Carbide Tool Tips With Induction  Objective: Attaching carbide cutters to a steel meat cutter impeller Material carbide blocks; steel shank fitting Temperature 1400 °F (760 °C) Frequency 300 kHz Equipment DW-UHF-30KW induction heating systems including: Induction heating coil Workhead: two-cap 1.0μF (Total 0.5 μF) Process The entire part is placed in a five-turn helical coil, the power is applied until the part is heated to the required temperature and a uniform heat pattern is achieved. The coil allows for easy fixturing and uniformity of heating between the carbide and the steel shank for a premium braze joint. Results/Benefits Precision: Due to the size of the induction coil, the process allows for precise placement of the carbides on the steel shanks Economy: Power is consumed only during the heat cycle Repeatability: joint quality is maintained in this repeatable process https://dw-inductionheater.com/brazing-carbide-tool-tips-with-induction.html?feed_id=230106&_unique_id=6544f15012f4e