Induction Soldering Wires Onto Connection

Induction Soldering Wires Onto Connection With IGBT Induction Heating Units Objective Heat connector assemblies for soldering Material Device assembly Tin plated brass terminals Solder paste Temperature 500°F (260°C) 5-7 seconds Frequency 360 kHz Equipment DW-UHF-6kW induction heating system equipped with a remote heat station, containing two 0.66 μF capacitor. An induction heating coil designed and developed specifically for this application. Process A single turn helical coil is used to heat the solder paste. The connectors are placed inside the induction heating coil and RF power is applied for 5-7 seconds until the connector heats. Solder paste is applied to the joint in two ways, stick-fed or manually. Results/Benefits • Compared to using a manual soldering iron, induction heating precisely applies heat to for higher quality solder joints • This is ideal for integrating with an automated system. By stick- feeding the solder more aesthetically pleasing parts are produced.