Induction Preheating Turbine Blade for Welding Application
Objective: Induction PreHeating a turbine blade to 1850 ºF (1010 ºC) for a welding application
Material : Steel turbine blade
Temperature: 1850 ºF (1010 ºC)
Frequency: 305 kHz
Induction Heating Equipment: DW-UHF-6kW-I 150-400 kHz
induction heating system equipped with a remote heat station containing two 1.5 μF capacitors.
- A single position one-turn induction heating coil designed and developed specifically for this application
Process The single position one-turn
induction heating coil was designed to heat the tip of the turbine blade. With a 6kW induction heating power supply, the turbine blade was heated to temperature within the targeted time of one minute.
Results/Benefits
Speed: The client wanted the part heated to temperature within one minute, which the process achieved
- Precision: The client desired uniform heating across the tip of the blade, which was attained with the proposed process
- Part quality: The end result is a preheating process that allows the part to move quickly to the welding step while
meeting all quality requirements
Results/Benefits
Speed: The client wanted the part heated to temperature within one minute, which the process achieved
- Precision: The client desired uniform heating across the tip of the blade, which was attained with the proposed process
- Part quality: The end result is a preheating process that allows the part to move quickly to the welding step while
meeting all quality requirements
