Objective
The purpose of this test is to demonstrate the induction soldering cable to metallic plate process.
Recommended Equipment
The recommended equipment for this test is the DW-UHF-6kw-I handheld induction heater.
Key Parameters
Power: Up to 0.72 kW
Temperature: 482°F (250°C)
Time: 4.5 seconds to 14 seconds
Results and Conclusions:
The results were satisfactory at 14 seconds. The complete process can be achieved in less than 5 seconds by increasing the frequency from under 200 kHz to over 300 kHz, as well as by increasing the induction heating power
https://dw-inductionheater.com/wp-content/uploads/2020/04/Induction-Soldering-Cable-to-Metallic-Plate-5.png?v=1585808236
https://dw-inductionheater.com/induction-soldering-cable-to-metallic-plate.html